Hydropulse Tomography for Identifying 3-D Permeability Distribution
For the purpose of identifying subsurface permeability distribution, a geotomographic method named Hydropulse Tomography (HT) was developed. As observation data, HT uses hydraulic pressure...
An Inverse Procedure for Estimating the Unsaturated Hydraulic Conductivities of Volcanic Tuffs
A procedure is developed for estimating the hydraulic conductivity function of unsaturated volcanic tuff, using measurements of the sorptivity and capillary pressure functions. The method...
Modeling of Fluid and Solute Transport in Fractured Rock
A new model for flow and solute transport in fractured rock is proposed. It is based on the concept of a network of channels. The individual channel members are given stochastically selected...
Solute Transport Characteristics of Fractured Dolomite in Southern Nevada, USA
Recirculating tracer tests in fractured Cambrian dolomite beneath the Amargosa Desert revealed (1) and 83-percent increased in apparent dispersivity resulting from a two-percent increase...
Open Channels in Fractures Maintained by Deposition and Erosion of Colloids
Colloids initially suspended in the water in fractures can deposit onto the fracture surfaces, and will partially or fully clog the fracture. The amount of clogging will depend on whether...
Thermal-Hydraulic Analyses of Molten Glass in a Joule-Heated Melter
Physical modelling using glycerine and three-dimensional mathematical modelling were executed to study temperature and flow profiles of molten glass in the melter for the vitrification...
Mine Support, Radiation and Ventilation Control with Spray-on Barriers
The use of spray-on liner agents to provide localized excavation support in place of traditional techniques such as shotcrete or bolts-and-screen has been the subject of extensive investigation....
A Homogeneous Equilibrium Model for Analysis of Spent Fuel Shipping Containers
Transportation of nuclear spent fuel is inevitable over the coming years. However, in order to ensure the safety of such transport, computational models must be established, which are...
Aperture Characteristics, Saturated Fluid-Flow, and Tracer-Transport Calculations for a Natural Fracture
We used surface-profile data taken with a noncontact laser profilometer to determine the aperture distribution within a natural fracture and found the surfaces and apertures to be isotropic....
Mercury Porosimetry Studies on a Natural Fracture
Mercury porosimetry techniques were used to study the effects of stress on the capillary pressure characteristics of a single natural fracture. In addition, permeability measurements were...
Modeling Gravity-Driven Fingering in Rough-Walled Fractures Using Modified Percolation Theory
Pore scale invasion percolation theory is modified for imbibition of wetting fluids into fractures. The effects of gravity, local aperture field geometry, and local in-plane air/water...
Wetting Front Instability in an Initially Wet Unsaturated Fracture
Experimental results exploring gravity-driven wetting front instability in a pre-wetted, rough-walled analog fracture are presented. Initial conditions considered include a uniform moisture...
Mount St. Helens Recovery Project
Work began immediately after the eruption of Mount St. Helens to restore Columbia River navigation, provide 100 year flood protection for the downstream communities located along the Cowlitz...
Use of Flood Control Features for Environmental Mitigation
The US Army Engineer District, Vicksburg (CELMK), plans to construct up to 167 water control structures, 52 confined disposal facilities, and 47 barrow pits as part of a major flood control...
Solute Transport Modeling under Unsteady Flow Regimes: An Application of the Modular Modeling System
Many existing solute transport codes rely on the assumption of steady (i.e. time-invariant) flow. This assumption severely limits such models, as accurate simulations often require realistic...
Remarks on Computer-Use History in Water Resources
Over the past 50 years, use of electronic computers has radically changed water resources engineering practice. It has enhanced capabilities, reduced costs and improved reliability. It...
Future Directions in Water Resources Education
Water resources education at the undergraduate level must change to properly prepare professionals for the 21st Century. While few changes are needed in technical content, graduates must...
Optimal Planning of Combined Sewer Rehabilitation
The need to rehabilitate many of the existing sewer systems to keep them operational is evident. The development of a rehabilitation plan that optimizes the use of funds is the first step...
Pipe Network Optimisation Using Genetic Algorithms
A new optimization technique of generic algorithms has recently been successfully applied to pipe network optimization. In this paper a parametric analysis is carried out of the genetic...
Combined Sewer Overflow Abatement Planning Based on SWMM EXTRAN Modeling
This paper discusses use of the Storm Water Management Model (SWMM), with the EXTRAN block as the hydraulic transport mechanism, as a tool for developing a facilities plan for abating...
Return to search