Time Domain Structural Parameters Identification
Identification techniques for linear lumped-parameters models of vibrating structures are critically assessed using data produced by numerical simulations. The structural model is excited...
Buckling of Thin-Walled Members by p-Version of FEM
P-Version of the finite element method (FEM) is used for one-D and three-D modeling of thin-walled open sections and axial compressive load. Equal angle and channel sections are used for...
Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Modeling Errors in Fatigue Crack Growth Laws
Using the fracture mechanics approach to fatigue it is possible to update estimates of a structure's reliability against fatigue failure given new information on the state...
Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....
Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...
Practical Application of PR Connections and Second Order Analysis
In the present LRFD Specifications type PR (Partially Restrained) connections are described as those where the connections of beams and girders possess an insufficient rigidity to hold...
Modeling Permissive Movements in TRANSYT-7F
Traffic Network Study Tool (TRANSYT-7F) is one of the most widely used traffic flow analysis and traffic signal timing optimization models in the United States and elsewhere. Through 'Release...
Modeling Dual-Ring Actuated Signals with TRANSYT-7F
Current and potential future methods of using the TRANSYT-7F computer program to model dual-ring actuated traffic signals are discussed. First the problems encountered in using this fixed-time...
An Adaptive Control Strategy for Signalized Intersections
This paper presents a microprocessor-based computational strategy for real-time demand-responsive traffic signal control. The strategy, termed OPAC (Optimization Policy for Adaptive Control),...
SIDRA?An Australian Program for Signalised Intersection Analysis
As more complicated signal phasing systems have been implemented in practice, the analysis methods have moved from a phase-control philosophy applied to approach roads to a group-control...
GTRAF: The Netsim Graphics System
This paper describes the development of an interactive computer graphics (ICG) system, named GTRAF, which will provide users with a new and highly efficient methodology for analyzing results...
Development of Graphics Displays for the Integrated Traffic Data System
This paper describes the development of interactive graphics displays for the Integrated Traffic Data System (ITDS) and provides technical details on the hardware and software considerations...
Spreadsheet-Based Queuing Models
This paper describes how microcomputer-based spreadsheet programs, such as Lotus 1-2-3, can be used to implement queuing models of varying levels of sophistication for use in traffic analyses....
Freeway Analysis Using A Micro Version of FREQ
FREQ8PE is a freeway corridor simulation model. It is a batch processing mainframe program written in ASCII FORTRAN IV, which performs three basic functions: simulate freeway queueing,...
ROADTEST?A Microscopic Traffic and Transit Simulator
A new computerized microscopic traffic simulation model ROADTEST is described. The model a general purpose one, permits simulation of any vehicles including trains and fixed route transit...
Conversion of the MIDAS Accident Analysis Model
The MIDAS (Michigan Dimensional Accident Surveillance) System has been developed to provide accident analysis capability. A microcomputer version of MIDAS is being developed to make the...
A Model for Analyzing Large Transportation Networks on a Microcomputer
The Pedestrian Level of Service (PEDLS) model combines the best features of spreadsheet programs - their ease of use for inputting data and producing printed output reports - with the...
Transportation Simulation Model Selection Criteria
This paper presents a checklist of questions concerning facets of transportation modeling software packages. This is intended to help the potential software purchaser in his or her search....
Trip Table Estimation from Observed Traffic Volumes
This estimation technique identifies the most likely trip table to produce a specified set of traffic counts when assigned to a representative highway network. The resultant table is derived...
Return to search