Design and Operating Criteria of the French Deep Repository for High Level Radioactive Waste
The design and operating criteria of the French geologic repository for high level radioactive waste (HLW) were selected for their contribution to operational and long-term safety, as...
Compilation/Validation of Thermodynamic Data for Plutonium for Nuclear Waste Disposal: 1. Preliminary Results
A provisional thermodynamic database for plutonium has been compiled from a review of available data and other critical compilations. The database was compared to tabulations of Gibbs...
Lubrication Theory Analysis of the Permeability of Rough-Walled Fractures
Lubrication theory is used to study the permeability of rough-walled rock fractures. Two idealized models of a fracture, in which the roughness follows a sinusoidal or a sawtooth variation,...
Predicted Thermal and Stress Environments in the Vicinity of Repository Openings
An understanding of the thermal and stress environment in the vicinity of repository openings is important for preclosure performance considerations and worker health and safety considerations...
An Approach to Evaluate the Sufficiency of Highway Bridges for Nuclear Spent Fuel Transportation
The transportation of radioactive spent fuel can have a significant impact on bridge structures located on designated routes. Due to the critical nature of the cargo and because of the...
Disposal of Vitrified Waste in an Unsaturated Environment
An experimental program is described wherein the effect of important independent variables on glass reaction under conditions that may exist for unsaturated storage is examined. The effect...
Development of a Structural Model to Analyze Public Opinion on a High-Level Radioactive Waste Facility
Studies show that Nevada residents and state officials oppose the proposed high-level radioactive waste repository project at Yucca Mountain. Nevada residents view the Yucca Mountain repository...
Field Investigations for Seismic Effects on Mechanical and Geohydrologic Response of Underground Structures in Jointed Rock
An exploratory Seismic Rock Mechanics research program has been initiated by the U.S. Nuclear Regulatory Commission at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to study...
Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...
Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Principles of the NATM and Other Uses of the Geologic Monitoring Techniques
The NATM (New Austrian Tunneling Method) differs in several respects from other construction methods. Also referred to as the 'sequential support method' or the...
Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...
The Integrated Performance Assessment in SKI Project-90
The SKI Project-90 is a performance assessment of a hypothetical repository system with KBS-3 features in crystalline rock. A large part of the effort has been to identify and characterize...
Testing of Materials and Scale Models for Impact Limiters
Aluminum Honeycomb and Polyurethane foam specimens were tested to obtain experimental data on the material's behavior under different loading conditions. This paper reports...
GA-4/GA-9 Honeycomb Impact Limiter Tests and Analytical Model
General Atomics (GA) has a test program underway to obtain data on the behavior of a honeycomb impact limiter. The program includes testing of small samples to obtain basic information,...
Comparison of Elastic and Inelastic Analysis and Test Results for the Defense High Level Waste Shipping Cask
In the early 1980's, the U.S. Department of Energy/Defense Programs (DOE/DP) initiated a project to develop a safe and efficient transportation system for defense high level...
Modelling of Excavation, Thermal Loading and Bentonite Swelling Pressure for a Waste Repository
For the performance assessment of a future nuclear waste repository, the excavation of the tunnel and deposition hole, thermal loading from waste heat release and the swelling pressure...
Estimating Geochemical Behavior of Cocnretes to be Placed at Yucca Mountain
The interactions of J-13 water with cementitious materials were examined at 25?C using the geochemical code EQ3NR/EQ6. Results of the modeling suggested the following conclusions: (1)...
Return to search