Hydraulic Profile Computation Using CADD
The data preparation can also be performed by directly recording onto a computer tape the aerial survey cross section ground points and the field survey work. A computer program can then...
Design and Construction of TCE/PCE Removal Facilities
This paper presents a review of the design and construction of a facility in Arcadia, California, to remove trichloroethylene (TCE) and tetrachlorethylene (PCE) from ground water. (Edited...
Structural Safety Studies
Structural engineers are most concerned with the safety aspect of structures. The primary objective of structural engineers is to produce structures which are satisfactory in meeting certain...
Foundations in Permafrost and Seasonal Frost
The papers in this volume cover the following subject areas: A method that utilizes a decision matrix diagram for selecting the most suitable and economical foundations for construction...
Seepage and Leakage from Dams and Impoundments
All major dams and impoundments are usually analyzed to determine the magnitude and location of seepage that can occur under, around or through the structure. More often than not, seepage...
Issues in Dam Grouting
Although perhaps the largest number of individual grouting projects do not involve dams, by far the largest volume of grout used is for grouting of new or existing dams. This volume presents...
Roller Compacted Concrete
Roller compacted concrete has emerged recently as an economical material and rapid method of construction for use in gravity dams, overflow structures and heavy duty pavements. The economics...
The Engineering Aesthetics of Tall Buildings
The Proceedings of a session on the Aesthetics and Design of High-Rise Buildings at the ASCE Convention in Denver is included in its entirety. The session was chaired by Lynn Beedle and...
Drilled Piers and Caissons II
Drilled piers or caissons, also called drilled shafts or bored piles, have long been a very cost effective foundation solution for many soil profile and load situations. A distinct advantage...
Optimization Issues in the Design and Control of Large Space Structures
The optimization and identification issues which arise in the design and control of large flexible space structures are reviewed. The first paper examines the use of several different...
Irrigation Canal Seepage and its Measurement
Reduction in seepage is one of the primary reasons used to justify investment in canal lining. Such justification depends greatly upon estimates of seepage through surface and subsurface...
Incorporating Crop Water Use in Drainage Design in Arid Areas
A method of drainage design for use in arid areas was developed by combining procedures proposed by D. B. McWhorter along with plant uptake functions developed by D. W. Grimes and D. W....
Risk Analysis for Ship-Bridge Collisions
The authors have developed a propriety software package which has been successfully used to perform risk analyses for several high-level bridge structures across major waterways in coastal...
New Orleans Flood Gates Hydraulic Model Study
A hydraulic model study was conducted to evaluate the forces exerted on selected floodgates by flowing water as the gates are closed after flooding has begun. The results of the study...
Hurricane Diana: Impact on Coastal Development
Hurricane Diana affected the coast of North Carolina during the period of September 11-14, 1984. Builders, designers, building officials and insurance adjusters responded to a written...
Hydropower
Recent Developments
The Foothills Project has been under consideration by the Denver Board of Water Commissions for many years. It is one of the major steps in the continued efforts of the Board to provide...
Micro-CAD Systems: A Dream Come True
Computer-aided design and drafting systems that run on inexpensive microcomputers are examined. Several major systems (products) are covered via the users point of view. Many small civil...
Get Involved with Cladding Design
Structural engineers should get involved with cladding design for their buildings. Including disclaimers for responsibility in the design contract will not prevent trouble or lawsuits,...
Bridging Twin Ports
The Major Richard I. Bong Memorial Bridge, part of U. S. Highway 2, connects harbors at Duluth, Minn. and Superior, Wisc. The new highway link was designed to relieve congestion on nearby...
Who Should Design Bridges?
For many years Design-Build-Proposals have been common practice in Europe (except in the UK). Structures in these countries are 20% more economical than similar projects in the U. S.,...
Return to search