ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

USDA-Water Erosion Prediction Project (WEPP)
The USDA-Water Erosion Prediction Project (WEPP) will develop improved erosion prediction technology based on modern hydrologic and erosion science that will be process-oriented and conceptually...

Sedimentation Impacts on a Pumpback Storage Facility
Concern over future sedimentation impacts at a proposed pump storage hydroelectric facility at Lake Francis Case on the Missouri River led to use of a numerical model to analyze lake hydrodynamics....

Optimization of Complex Hydrologic Models Using Random Search Methods
The primary objective of automated calibration of complex conceptual hydrologic simulation models is to find the global optimum of a specified response surface. While direct search techniques...

Automatic Calibration of Conceptual Rainfall-Runoff Models
An automatic calibration strategy applied to land and channel components of the National Weather Service River Forecast System is outlined. Aspects discussed include the objective function...

A Comparative Study of Different Base Isolators
A comparative study of the effectiveness of four different base isolators is carried out. The structure is modeled as a rigid mass and the accelerograms of the North-South component of...

Response of Structures to Horizontal-Vertical Earthquakes
In the present work, the responses of a class of hysteretically nonlinear structures subjected to the combined horizontal and vertical random ground accelerations are studied. A massless...

Cracking of a Tilt-Up Structure Due to Dynamic Loads
The extensive cracking of a tilt-up reinforced concrete structure is discussed. The site investigation revealed horizontal cracks at two feet to seven feet above a mezzanine level which...

Probabilistic Models of Fatigue Crack Growth
The reliability of a structure against metal fatigue is a problem that has been of concern to engineers for a very long time. This problem was one of the first to be approached probabilistically,...

Applications of Fiber Bundle Model to Structural Engineering
The bundle failure time has been studied extensively for both deterministic and random loads. The objective of this paper is to apply results in these studies to the dynamic analysis of...

Seismic Response Component in the Risk Assessment of Dams
The risk analysis model for dams that is discussed in this paper considers the probability of an initiating event and the following conditional probabilities of the system response, the...

Simplified Steel Compression Member Design
The objective of this paper is to present a simplified method of designing steel columns subjected to axial loads and moments for use in situations where automated design methods are inappropriate....

Comparisons of Full Scale and Wind Tunnel Model Response to Wind of Long Span Bridges
There are several vital reasons for measuring the response of full scale structures to wind and comparing the results to models - both experimental and analytical - employed in design....

The Application of Aerodynamic Model Tests to Wind Loading of Tall Buildings
The theory of the aerodynamic model test, in which the wind response of tall structures can be computed for a range of dynamic properties from a measurement of the external wind load,...

Drop Test of Dolos Armor Units
Dolosse are concrete armor units used for the cover layer on many breakwaters and jetties. In order to study their complex loads and structural response, a prototype study at Crescent...

Time Domain Structural Parameters Identification
Identification techniques for linear lumped-parameters models of vibrating structures are critically assessed using data produced by numerical simulations. The structural model is excited...

Buckling of Thin-Walled Members by p-Version of FEM
P-Version of the finite element method (FEM) is used for one-D and three-D modeling of thin-walled open sections and axial compressive load. Equal angle and channel sections are used for...

Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...

Modeling Errors in Fatigue Crack Growth Laws
Using the fracture mechanics approach to fatigue it is possible to update estimates of a structure's reliability against fatigue failure given new information on the state...

Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....

Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...

 

 

 

 

Return to search