ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Flat Dilatometer Tests in Calibration Chambers
This paper presents the results of a series of Flat Marchetti's Dilatometer Tests (DMT's) performed in a large Calibration Chamber (CC) on dry Ticino (TS) and...

Residual Soil Settlement From Pressuremeter Moduli
The Menard pressuremeter test is briefly described, and practical drilling techniques are summarized for Piedmont residual soils. Applications and limitations of the pressuremeter are...

Laboratory and Field Evaluation of Cone Penetrometers
Cone penetrometers from 8 organizations have been studied by performing laboratory tests and field tests. The testing show that pore pressure and temperature zero shift affect significantly...

In Situ Tests with K_o Stepped Blade
The results of field tests conducted using the K//o Stepped Blade to determine lateral stresses and other geotechnical properties are presented. The sites tested represent a wide range...

Pore Pressure Effects in Borehole Shear Testing
The effects of excess pore pressures on shear strength results obtained using the Borehole Shear Test (BST) were investigated. Pore pressures were measured during the consolidation, shear,...

Electrical Method of Predicting In Situ Stress State of Normally Consolidated Clays
The electrical method was used to characterize the electrical anisotropy, shape and cementation of fine grained soils. It was found that for normally consolidated soils there is a strong...

Bearing Capacity of Footings on Clay CPT Method
A method is proposed to predict the ultimate bearing pressure for footings on clay using data from cone penetration tests. This method relates the ratio of ultimate soil bearing for a...

Use of Piezometer Cone Data
The piezometer cone is generally regarded as the most efficient tool for stratigraphic logging of soft soils. A thin pore pressure element (5 mm thick) can sense layers a few centimeters...

CPT Indexing of In Situ OCR in Clays
Cone penetration tests may be used to index the in situ preconsolidation pressure in clay deposits. A specified relationship between C//u/ sigma //vo and the overconsolidation ratio (OCR)...

Relative Landslide Susceptibility in Davis County, Utah?A Multivariate Approach
The complex distribution of soil properties makes prediction of slope stability extremely difficult in these mountain watersheds. The need to assess these watersheds for their susceptibility...

Making Water System Rehabilitation Decisions
Making decisions regarding water distribution systems has always involved a great deal of judgment due to the complexity of the decisions involved. This paper presents a framework for...

Model for Optimal-Risk Based Water Distribution Network Design
Various models using a variety of optimization techniques were developed for determining pipe diameters, network layout, pump capacities, and other design parameters. The objective function...

Traveling Trickler Center Pivot Design
There have been a number of proposals to improve the center pivot irrigation system in order to overcome the inherent inefficiency from high evaporation losses and energy requirements....

Grand Canyon Water Line by Directional Drilling
The South Rim Village at Grand Canyon National Park obtains its water supply from a point called Roaring Springs which is located approximately 15 miles across the Canyon on the North...

The Past, Present & Future of Earthmoving Scrapers
This paper is a summary of the history and development and use of earthmoving scrapers. It will also take a look at the future of this type of machine. We'll build the discussion...

Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...

Ice Forces on Bridge Piers
The force that river ice exerts on bridge piers has been studied in the field and with models in the laboratory. Ice forces are a function of the strength, thickness, failure mode and...

Continuous Loading Consolidation Testing Using a Microcomputer for Control and Data Acquisition
An overview of some of the methods of one-dimensional consolidation testing currently in use is presented, including the load-increment test, the constant rate of strain test, the constant...

Designing for Flow
Geotextiles used for in-plane drainage can carry surprisingly large amounts of water within their structures. These composite drains, known as sheet drains, prefabricated drainage composites...

Porewater Pressure in Clays Below Caisson Islands
Unfrozen lightly overconsolidated clays are a significant factor in the design and performance of exploration caisson retained islands in the Canadian Beaufort Sea. At two sites (Tarsiut...

 

 

 

 

Return to search