Emplacement Drift Temperature Reduction by Cooling Enhancement and Ventilation
The application of cooling enhancement in a short vertical container emplacement layout is analyzed. Two 25 m-long heat pipes upward oriented at 45 degrees are installed at each emplacement...
Column Buckling Mode Classification Using a Back Propagation Neural Network
A back propagation neural network (Rumelhart, Hinton and Williams, 1986) is used to analyze and classify the buckling mode shapes of structural columns. The input patterns consist of vectors...
Boston's Sewage Outfall
The centerpiece of the Boston Harbor cleanup plan will be the sewage plant on Deer Island, which will treat water from 43 municipalities in the Boston metro area�500 mgd to start. In order...
Infrared Thermography Based Pipeline Leak Detection
Computerized Infrared Thermographic pipeline inspection is now a refined and reliable process having been thoroughly proven to be an accurate, cost effective, and efficient technology...
Corps of Engineers Water Control Data Systems for the 90's
Corps of Engineers water control data systems encompass all of the instruments, equipment, computers, and software used to collect and use environmental data in real-time water control...
Design Program for Gravity Sanitary Sewers
The Gravity Sewer Design Program Version 2.1 M (GSDP2M) performs the hydraulic design for a conventional gravity sanitary sewer network. GSDP2M is written in standard Fortran 77 for batch...
Modeling 70,000 Feet of Interceptor for Aurora, CO
During preliminary design for the City of Aurora's Tollgate Creek Interceptor Sewer Improvements, the authors modeled over 70,000 linear feet of interceptor for both present...
Application of GIS in Monitoring and Trouble Shooting of Water Distribution Systems
In this study, the suitability of Geographical Information System (GIS) to monitor water distribution systems is investigated. Although GIS applications are widespread, the use of GIS...
Diagnostic Options for Pipeline Rehabilitation
The various diagnostic options utilized for solving pipeline problems/failures continue to increase at a very rapid pace. Field reconnaisance and/or man-entry of pipelines is becoming...
The Danby Pipe Renovation System
This paper describes a pipe renovation system and its structural characteristics which is cost effective and technically suitable in all sizes of pipe from 8 inches (200 mm) to the largest...
Rebuilding Buried Pipelines Without Digging
Advances and refinements in trenchless reconstruction technologies now permit system rebuilding of gravity and low pressure pipelines without excavation. Through the use of cured-in-place...
Methods for Designing Hydraulic Aquifer Remediation Techniques
This paper reports on recent research to develop methods for accommodating uncertainty in designing hydraulic remediation systems for contaminated aquifers. The methods rely respectively...
Network Modeling in a Water System with Ferrous Deposits
This paper presents the experiences and results of a network modeling study. A model for the University of Idaho water supply system was developed and verified to the extent possible with...
A Comprehensive Algorithm for Network Calibration
An explicit calibration algorithm is proposed which provides the direct and rapid adjustment of the pipe roughness coefficients and junction node demands that exactly meet a specified...
A Logical Variable Approach to Water Supply Reliability
The calculation of the reliability that water will be available at a demand point in a distribution network is complicated by the redundancy of paths from the source to the point. The...
Neurocomputing?State-of-the-art
Neurocomputing, an evolving discipline of science and technology which involves the study and use of nonlinear networks of parallel processing elements for certain classes of information...
Block-based Solvers for Engineering Applications
This paper compares the performance of standard linear system solvers, LINPACK, widely used in engineering applications, and PARALIN (a block-based package for linear systems) on the Alliant...
Design of a Neural Network Power Grasp Controller
An overview of research on the development of an artificial neural network controller used to implement power grasping on the DIGITS Grasping System is presented. The DIGITS System, under...
Application of Artificial Neural Networks to Composite Ply Micromechanics
Artificial neural networks can provide improved computational efficiency relative to existing methods when algorithmic description of functional relationships is either totally unavailable...
A Neural Network Environment for Intelligent CAD
A framework is presented for development of an environment for creating intelligent systems for computer-aided design of structures by integrating neural network models of learning and...
Return to search