Lunar Oxygen Production in a Hydrogen Cold Plasma
This paper examines the concept of oxygen production from unbeneficiated lunar regolith using a non-equilibrium or 'cold' hydrogen plasma. An experimental investigation has indicated that...
Carbon Formation Theory for Space Oxygen Processes
Production of oxygen from the Martian atmosphere or lunar soil and the recovery of oxygen in manned space environments may include carbon formation from CO as a unit process. Thermodynamic...
Oxygen from Lunar Soil via Fluorination
This paper considers oxygen extraction from lunar soil via fluorination, for reasons of its high effectivity of oxygen release from most silicates. In addition to theoretical investigations,...
Sintering Bricks on the Moon
Sintering of full-scale 'bricks' from lunar soil simulant materials can be accomplished by radiant heating to 1100?C for approximately 2 hours, followed by slow cooling. Small-scale precompaction...
Design Criteria for Lunar Construction Equipment
It is anticipated that lunar installations will, from the beginning, require moving and assembly of components and the use of lunar regolith as a construction material. The functional...
Optical Waveguide Solar Energy System for Lunar Material Processing
This paper summarizes a study of the optical waveguide (OW) solar energy system for lunar material processing. In the OW solar energy system, solar radiation is collected by the concentrator...
Analysis of Glass-Ceramic Production from Lunar Resources
Two simulated regoliths were used to investigate the effects of processing and composition on the properties of lunar-derived glass-ceramics. For the simulant with moderate iron concentration,...
An Ultra-Lightweight Advanced Technology Telescope for Space Applications
We propose a new type of telescope designed specifically for space and lunar applications. The optical reflecting surfaces of the telescope are made by replication onto thin ultra-lightweight...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Nonlinear Collapse of Offshore Jacket Structures
The Joint Industry Tubular Frames Project was established with ten oil industry sponsors to investigate the reserve and residual strength of frames typical of offshore structures. To date...
High-Strength Concrete Columns in High-Rise Buildings
Strength and ductility of high-strength concrete columns were investigated by examining available test data. The results are summarized in terms of load and ductility capacities of columns....
Cumulative Impact of Heavy Permit-Trucks on Steel Bridges
In many parts of North America, special permits are issued to heavy vehicles without considering their cumulative effect on steel bridge components. Such overloads may initiate crack propagation...
Lateral Bracing Criteria of the Composite Braces
In order to simplify the hysteretic characteristics of diagonal steel braces, a lateral bracing problem of unbonded braces embedded in the concrete panel is treated here. Lateral bracing...
Shock-tested R. C. Slabs: Significant Parameters
Shock-tube tests of plain concrete and reinforced concrete (R. C.) slabs were performed. The influence of free water in concrete pores, emphasized in previous tests at a material level,...
Load Rate Effects on Concrete Compressive Strength
Plain concrete cylindrical specimens from six different concrete mixes, 51 mm in length and diameter, were tested in compression quasi-statically at strain rates between 10-6/sec...
Impulsive Punching of Fiber-Reinforced Concrete Slabs
The behavior of FRC slabs reinforced with polymeric fibers (polyacrylonitrile fibers PAN) and subjected to impulsive punching is analyzed here in order to clarify to what extent the fibers...
Innovative Design of Steel Gable Frames
Common wisdom holds that conventionally designed gable frames fabricated from rolled sections cannot compete with metal building system frames fabricated from plate and bar stock, from...
FRP Box-Beams Under Long-Time Static and Fatigue Loading
This paper discusses experimental and analytical aspects of the long-time behavior of filament wound E-glass fiber reinforced epoxy-box-beams. Theoretical and experimental data are compared...
Rational Limits for Longitudinal Steel in Concrete Columns
Current limits for the amount of longitudinal reinforcement in concrete columns were established more than 60 years ago. Commercial grades of reinforcement in 1930 were about half as strong...
High-Strength Concrete Columns: State of the Knowledge
This paper consists of reported information divided into two general categories, performance of High-Strength Concrete (HSC) columns under concentric loads, and combined axial and bending...
Return to search