Lateral Force Distribution in Manufactured Housing from Full-Scale Testing
The research focused on the behavior of two manufactured 14 ? 66 ft houses under simulated wind loads. Extensive instrumentation was employed to insure the collection of data that would...
Fourier Series Expansion on Determination of Response Bound of Beam
Fourier series expansion is suggested to discrete the continuous vibrating system by regarding Fourier constants as generalized displacement parameters. The orthogonal merit to the terms...
Cross Shore Variations in Heavy Minerals in Beaches of the Barrier Dominated Southeast Atlantic Coast
Cross shore beach sample sets from 102 locations along the barrier dominated Atlantic coast from Kitty Hawk, North Carolina, to Palm Beach, Florida were studied to determine if there were...
Gamma Exposure from Rn Progeny in GAC Units
An investigation into the gamma exposure rate generated by granular activated carbon (GAC) water treatment units focused on ten sites that covered a range of source radon (Rn) in water...
Surface Water Particles: Coagulation and Sorption
A size-dependent particle and particle-associated contaminant transport and fate model is presented. The unsteady, two-dimensional model couples the water column and bed and enables analysis...
The Water Erosion Prediction Project: Model Overview
A new generation of water erosion prediction technology is being developed by the USDA Water Erosion Prediction Project (WEPP). The WEPP models are a new erosion prediction technology...
Computer Control of Houston's Water System
The City of Houston's Central Surveillance and Control System utilizes dual host computers and over 100 'smart' Remote Terminal Units to control...
A Tracer-Model for Morphological Simulations of an Estuary
Numerical models for longterm morphological simulations are traditionally based on assumptions like vertical integration of the flow and transport equations and their decoupled treatment....
Bed Topography and Sorting in Alluvial Channel Bends
A quasi-three-dimensional model has been developed for the purpose of calculating the velocity distribution, the bed topography and sediment sorting along channel bends. The depth-averaged...
Groins and Vanes Developed Basing Upon a New Concept of Bank Protection
At curved bends, scour at the outer bank always accompanies deposition at the inner bank. A highly efficient river course for flood flow is considered to have a small lateral gradient...
General Formulation of Best Hydraulic Channel Section
The best hydraulic channel section is determined by using Lagrange's method of undetermined multipliers. The approach presented is more general & easier to apply than...
Probabilities of Hydrologic Extremes and Risk Analysis
Extreme floods of very low probabilities, e.g., 10-6 and 10-7, are estimated using data on annual flood peaks...
Joint Probability Calculation of Storm Depths
A methodology is presented to estimate exceedance probabilities of rainfall depths over large areas using joint probability. The joint probability estimate combines the frequency distribution...
Geostatistics: From Mining to Hydrology
Geostatistics originated in the mining industry to help estimate the amount of metal contained in a block or ore, from a systematic sampling of the block. In this paper, the major geostatistical...
Effects of Runoff Changes and Sea Level Rise on Salinity in the Delaware River Estuary
The objective of this study is to investigate changes in the spatial distribution of salt in the Delaware Estuary resulting from climate induced changes in freshwater inflows and in the...
Technical Considerations in Numerical Modeling of Pressure Reducing Valves in Water Distribution Systems
In large water distribution networks, pressure reducing valves (PRVs) are common water appurtenances. However, there are difficulties in representing them when using the Hazen-Williams...
Model Study of New Madrid Pumping Station
The proposed pumping station on the New Madrid Floodway consisted of a draft tube type sump design (referred to as a formed suction inlet) to eliminate swirl and provide a more uniform...
Overfall Stress and Pressure Distributions
The magnitude and distribution of hydraulic shear stress and pressure on the boundary of a straight drop overfall are presented for multiple overfall heights and flow rates. Hydraulic...
Siting the New Boston Outfall: Near-Field Considerations
This paper describes a procedure applied in near-field considerations for siting the new outfall to serve the Massachusetts Water Resources Authority's (MWRA) proposed regional...
Flow Characteristics in an Irregular Spillway Model
A physical model of the spillway for a proposed water supply reservoir near Meridian, Texas, was constructed to determine the optimum spillway design which would maintain an acceptable...
Return to search