Reliability Constraint on Optimum Design
The purpose of the paper is to emphasize the importance of the probability concern on optimum design work. The probability of failure of the structure can be considered as one of the optimum...
Optimization for Overall Stability
This paper synthesizes design of trusses for linear stability constraint as an optimization problem where linear stability is defined as a generalized eigenvalue problem and presents a...
Seismic Design of Braced Steel Frames
Seismic behavior of a six-story, K-braced structure without backup ductile moment-resisting frames designed according to the current Uniform Building Code is studied in this paper. The...
Bidirectional Seismic Response of Simple Structures
For design purposes it has been common to consider that seismic excitations act in one direction at a time. Analytical studies over the past decade have indicated that this may not be...
Impacts of Risk-Based Analysis on Current Design Practices
A summary of hydrologic design standards used by selected federal agencies for the safety evaluation of dams is presented. A computational procedure is outlined to develop hydrologic design...
Factory Chic
Developers of the International Design Center of New York have recently spent $163 million to convert an unused chewing gum factory and a former battery plant into a showcase for New York...
Uncertainty and Conservatism in the Seismic Analysis of Nuclear Facilities
Traditionally, seismic analysis and design of nuclear power plant structures are performed using deterministic procedures. In order to address the issue of the likelihood of failure, probabilistic...
The Basics of Water-Resistant Brick Walls
Water-resistant masonry walls of burned clay or shale brick are the result of a conscious effort to produce them, by everyone involved in their creation. Furthermore, owner maintenance...
Structural Monitoring Concepts for Arctic Pipelines
Terrain instabilities producing differential soil movements are the predominant features affecting the structural integrity and design of buried pipeline systems in the arctic. Current...
Structural Design of the Defense Waste Processing Facility
The Defense Waste Processing Facility (DWPF) is designed to process radioactive defense waste sludge and the radioactive nuclides, cesium and stronium, from the salt solution. These radioactive...
A Generic Design for On-Site Low Level Radioactive Waste Storage
This paper describes a generic design for an on-site low level radioactive waste storage facility. The generic design encompases the development of design criteria including an envelope...
Building Arrangement and Site Layout Design Guides for On Site Low Level Radioactive Waste Storage Facilities
This paper will discuss a typical storage facility and address the design considerations and operational aspects that are generally overlooked when designing and siting a low level radioactive...
Design of Impact Limiters for Waste Fuel Shipping Casks
Impact limiters are often used to control the decelerations experienced by a waste fuel shipping cask when it is subjected to the hypothetical accident condition loadings. Simplified design...
Requirements of a High Technology Owner
The requirements of a high technology owner are best represented by a set of expectations and goals that are needed to achieve a certain business plan. There are extreme time pressures...
Structural Engineering for High Technology Clients
The unique requirements of the high tech industry provide interesting and fascinating challenges to the structural engineer of the 1980's. The following is a list of the most...
Design of High-Technology Facilities from the Vibration Standpoint
High-technology facilities, such as those used for the production of integrated circuits or for optics research, generally require extremely limited vibration environments. Suitable precautions...
Renovation Versus New Construction for High Technology Manufacturing Facilities
The purpose of this paper is to compare the differences between renovation and new construction for High Technology Manufacturing Facilities. The standards of quality, cost, and schedule...
CADD Application to Structural Framing Systems
This presentation illustrates the formulation of a Computer Aided Analysis/Design/Detail (CADD) program package utilizing a common microcomputer data base. It presents a new CADD technique...
The Advantages of Shared Data in a 3-D Structural CAE Environment
An integrated three-dimensional CAD/CAE data base helps solve problems of maintaining current data, sharing data with the several phases in the structural process and with other disciplines....
Water System Data Base for Naples, Florida
Boyle Engineering Corporation has developed a comprehensive database technique using its Intergraph Computer-Aided Design and Drafting (CADD) system to assist in the computer modeling...
Return to search