Uplist Capacity of Pile Foundations Using CPT Data
Southern California Edison Company has performed field uplift load tests on concrete driven piles, cast-in-place straight shaft piles and cast-in-place belled piers along transmission...
The Pressuremeter for Foundations: French Experience
The paper presents historical information on the development of the pressuremeter and its application in the Laboratories Central des Ponts el Chaussees (LCPC). The continuous research...
Dilatometer to Compute Foundation Settlement
Sixteen examples demonstrate how the S. Marchetti dilatometer test (DMT) provides soil compressibility data for the rapid calculation of foundation settlements with an average ratio of...
Ports '86
Ports '86 had the theme of Innovations in Port Engineering and Development with keynote speakers looking ahead to Port Development in the 1990's. The program...
Designing for Maintainability
Inspection and maintenance guidelines are unavailable for many buildings. Building owners seldom have the benefit of such information because buildings are often considered passive systems,...
Parking Lot Gets White Top
The many-acre parking lot at the Valley Fair Mall shopping center in Salt Lake City, Utah is described. In 1985 the asphalt pavement was overlaid with concrete, making it one of the relatively...
Beauty and the Bridge
At the California Department of Transportation, a special aesthetics unit works closely with the design engineers in the Division of Structures, which has won almost 400 prizes for its...
Effect of Particle Size on Sludge Dewaterability
Using a modified Buchner funnel apparatus to measure specific resistance and a sequential centrifugation/filtration procedure to fractionate a sludge, it was possible to more precisely...
Sea Level Rise and Coastal Stormwater Drainage
Global sea level rise as a result of the greenhouse effect and the past trend and future projection on the rise are discussed. Potential problems associated with coastal stormwater drainage...
Plunge Pool Energy Dissipators for Some Dams in Taiwan, ROC
This paper presents a brief description of the characteristics of the plunge pool type energy dissipators, including design considerations, hydraulic model tests, as well as the results...
Air Slot in Tunnel Spillways of Feitsui Dam
The tunnel spillway of the Feitsui Reservoir Project near Taipei has a head drop of more than 110 m, and maximum discharge of 1,500 cms. For prevention of cavitation in the tunnel, an...
Modeling of the Undular Jump for White Water Bypass
Two of the authors have reported previously on the hazard that a conventional hydraulic jump with a uniform reverse surface roller presents to white water boaters. The intent is to create...
Scale Model Study Benefits Hydropower Project
The Jim Falls Project on the Chippewa River in Central Wisconsin deals with the replacement of an aged 11 MW run-of-river hydropower plant by a 48 MW peaking plant. A hydraulic model built...
Design Storms for Urban Drainage
The characteristics of design storms for urban drainage are reviewed. There are indications that, under certain conditions, design storms produce runoff simulation results which are equivalent...
Characteristics of Intense Storms in Kansas
This paper examines point-rainfall characteristics of intense storms in Kansas. Hourly rainfall records were analyzed for 1006 intense storms selected from some 1800 station-years of data....
Outlet Structure Hydraulics
Current detention basin design procedure is to design the outlet structure for two or more return periods. This is sometimes done by combining weirs and/or orifices of various sizes and...
Computer-Aided Analysis of Treatment Plant Hydraulics
This paper describes software for the hydraulic analysis of water and wastewater treatment works. HADES (the Hydraulic Analysis, Design, and Evaluation System,) provides interactive analysis...
Hydraulic Reliability of Urban Water Distribution Systems
Conventional planning and design approaches for urban water distribution systems consist of trial and error procedures to select piping network configurations, pipe sizes, storage capacities...
Modeling Reliability in Water Distribution Network Design
The component failures in a water distribution system include pipe breaks, pump failures, valve failures, storage malfunctions, etc. The reliability of these components has an effect upon...
Model for Optimal-Risk Based Water Distribution Network Design
Various models using a variety of optimization techniques were developed for determining pipe diameters, network layout, pump capacities, and other design parameters. The objective function...
Return to search