A Mathematical Model for Predicting the Motion of Polluting Surface Plumes Due to Drift Currents
The paper analyzes the problem of displacement from the offshore to the nearshore of a polluting surface plume, subject to advection generated by wind-waves and wind-currents. After a...
Long Term Wave Statistics
Long term wave statistics are needed for many applications in coastal engineering and oceanography in the southern North Sea. Three sources of wave data are available: visual observations,...
Factors Responsible for Varying Granulometric Characteristics of Sediments from the Western Nigeria Coastline
The western Nigeria coastline stretches from Badagry in the west (Longitude 5?00'00E), covering a distance of about 275km. Two major geomorphic coastal units are recognized along this...
Development of the Long Caisson Type Vertical Breakwater
The width of the caisson of a breakwater is calculated based mainly on the wave force expected to act on the caisson. IN this calculation, the assumed wave force is the peak wave force...
Hydrologic Modelling of Extreme Flood on Small Mountainous Watersheds
Statistical and deterministic methods for extreme flood estimation were applied to Swiss alpine catchments to assess the application limits of each approach. Comparative results produced...
Manning's n From Experiments with Rainfall-Runoff on Portland Cement Concrete Surfaces
Experiments were conducted under artificial rainfall on Portland cement concrete (PCC) surfaces with variable mean texture depths (MTD) and slopes (S). Rain rates were varied up to 3 in/hr...
Climate Change: Is Trouble Ahead for Water Engineers?
Very long range forecasts of future global warming from 2 to 5?C have been made as a result of the increase in carbon dioxide and trace gases in the atmosphere due to man's activities....
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Siting Agricultural Weather Stations
Studies were conducted in Arizona and Washington to investigate how the surrounding fetch affects data collected by agricultural weather stations (AWS). AWS surrounded by extensive areas...
Steel Penstocks
Mechanism of Air Entrainment in Spillway Aerators
The mechanism of air entrainment in the Nappe over spillway aerators was investigated. Turbulence was identified as the main agent for aeration. It was found that Nappe underpressure influences...
Hydraulic Analysis of the McCook Outlet Manifold
A 1:40-scale model of the proposed McCook Outlet Manifold was tested at the U.S. Army Engineer Waterways Experiment Station (WES). Subsequently, flow conditions in the manifold were calculated...
Dune Profiles Before and After Storm Events in Coastal Massachusetts
It is well known that short-term changes in dune profiles can have a major effect on the severity of storm damage to coastal areas. In light of this, the standardized methodology developed...
A Model for Low-Drag Landslides
Field observations and experimental records indicate that the primary mode of motion of many large landslides is that of sliding rather than flowing. Most of the shear during sliding is...
Hurricane Andrew in South Florida: Preparing a Water Management System for Disaster
This paper analyzes Hurricane Andrew from its beginning as a tropical storm to the powerful force that it later became. The careful monitoring that took place throughout its transformation...
Protecting the Boca Raton Outfall Before and After Hurricane Andrew
A critical factor for the success of an ocean outfall is its ability to remain intact and functional for many decades of service, despite extreme episodes of wave attack and beach erosion....
Mechanics of Riprap Movement in Tidal Flow
This analysis emphasizes the need to obtain data on the size and shape of riprap pieces as a function of movement, data which are surprisingly difficult to obtain from published studies....
Flow and Scour Near an Abutment
Laboratory experiments were used in conjunction with a two-dimensional depth-averaged numerical flow model, RBFVM-2D, to investigate the relationship between flow velocity distribution...
Computational Hydraulics?The Systems Approach
This paper introduces two modern computational hydraulic computer programs that combine the calculated subcritical and supercritical water surface profiles and pressure gradients in open...
Return to search