Quantifying Mud Exchange Between the Eastern Scheldt Tidal Basin and the North Sea
Net transport of sediment < 53 ?m through the mouth of the Eastern Scheldt has been quantified. Combination of data on spatial and temporal variability shows that incertainties...
Effect of Varying Sediment Size on Equilibrium Beach Profiles
Beach profiles from four field sites and accompanying data describing the cross-shore distribution of median sediment size are analyzed and compared to predicted profiles based on an equilibrium...
The Sedimentary Organisation and Behaviour of Drift-Aligned Gravel Barriers
Drift-aligned barriers formed of coarse clastic materials and described in terms of their organisational evolution at two levels, a) sorting and selection of clasts; b) development of...
Sorting Characteristics of Tidal Inlets
An hypothesis is presented as follows: Littoral processes at a tidal inlet remove a disproportionately higher quantity of fine grain sediment than coarse grain sediment from the littoral...
Mound Migration in Deeper Water and Methods of Categorizing Active and Stable Depths
Sustained shoreward migration of several dredged material disposal mounds, including one in 6-m depths off the Alabama coast, should encourage greater use of nearshore placement to conserve...
Complex Principal Component Analysis of Wave-Like Sand Motions
Complex Principal Component Analysis is applied to bathymetric data from the SUPERDUCK experiment at Duck, NC. This approach is shown to describe more of the variation with fewer functions...
Effects of Temperature and Mean Cell Residence Time on Enhanced Biological Phosphorus Removal
The effects of temperature and mean cell residence time (MCRT) on biological phosphorus and nitrogen removal were investigated by operating pilot-scale continuous-flow activated sludge...
Magnetic Fluid Conditioning
Industry is now turning to develop magnetic water treatment in an effort to discontinue the use of chemicals. Magnetic water treatment takes a different approach to solving the same problem...
Information Entropy and Environmental Engineering
Environmental engineering decisions are often made with limited information. In such cases it is useful to express uncertain quantities with a probability distribution. The use of information...
Concrete Gravity Dam Cracking Analysis Methodology
This paper describes a methodology for the prediction and evaluation of cracking behavior in concrete gravity dam's for use in periodic safety investigations as outlined in...
Three Dimensional Modeling of Concrete Dams with Cracks Using Boundary Element Methods
Determining uplift pressure distributions in cracks in a concrete dam requires coupling between crack hydraulics and the stresses and displacements occurring in the rock and the concrete...
Physical Hydraulic Modeling for Construction of New York State Dam Hydroelectric Project
The New York State Dam is located on the Mohawk River near its confluence with the Hudson River. Downstream from the dam, the river flow is divided into four main channels as the water...
Some Unusual Vibrations in Hydro Machinery
Most hydro machinery engineers have read the textbook cases of self-exited and flow induced vibrations. Usually such textbook vibrations are only found in the text book! In the real world,...
Hydraulic Weighing Lysimeter Measurement Errors
A prototype size lysimeter was studied in the laboratory to determine accuracy and sources of error that might be caused by variable pillow contact area, temperature changes in various...
Lysimetric Monitoring for Operation of Irrigation Systems in the USSR
The author suggests a new method for operational control of irrigation regimes which is based on monitoring of a number of critical parameters related to the yield potentials of crops....
Thermal Regimes at Tailwaters of Hydroelectric Dam
Continuous temperature data were collected in the field for periods of approximately two weeks in Center Hill Tailwater. These data were analyzed to determine the warming rates and travel...
Effect of Nile River Flow on Performance of Shoubrah Power Plant Cooling System
Shoubrah El-Khimah Power Plant was built in 1982. Its peak capacity is 1200 MW, generated by four units, three of them having one cooling water intake. The cooling water pumps suffer from...
Three-Dimensional Velocity Distribution at Open-Channel Diversions
A study is underway to develop an improved understanding of the 3-D flow pattern at 90? diversions. The main goal is to explain, via the velocity distribution, the behavior of sediment...
Temperature Rise, Bank Erosion, and Jet Velocity Effects of Submerged Multiport Diffusers in an Estuary
Temperature distributions, potential bank erosion, and jet velocity and trajectory of submerged multiport diffusers were predicted as part of the permitting process for an fossil fuel...
Environmental and Hydraulic Considerations in the Design of a Circulating Water Cooling System
Environmental considerations play an important part in the design of a condenser cooling system. A once-through system may require assessment of a combination of events to determine the...
Return to search