Rotating Crack Model and Fracture in a R/C Medium
In this study the potential of the development of cracks in the members of a reinforced concrete large panel structure is considered. The analysis is carried out using finite element modeling...
An Overview of the Analysis and Design Techniques Used on the Main Tunnels of the SSC
Sophisticated numerical analysis and design techniques were devised for the Supercollider in order to produce a design which closely reflected the constraints of the construction processes,...
Numerical Modeling of Initial Ground Movement in an Instrumented Superconducting Super Collider Shaft
A 5.5 m diameter shaft was sunk into a rock formation of Taylor Marl to a depth of 61 m at the Superconducting Super collider (SSC) site. Numerical modeling using finite difference analysis...
Prediction of Ground Deformations Due to Excavation-Application to Tunnel Lining Design in Weak Rock
Prediction of ground deformations due to excavations is simulated by three dimensional non-linear finite element analyses. It considers various in-situ ground stress levels, excavation...
Three Dimensional Simulation of Progressive Tunneling Process for Lining Design of Intersecting Tunnels in Soft Rock
This paper presents the results of the state-of-the-art three-dimensional nonlinear finite element modeling of progressive tunneling process and its comparison with field data. Reasonable...
Database Integration in Support of Construction Management
This presentation will describe how new object-oriented technology is being applied to this problem. The goal of this use of object-oriented systems is 1) to provide a method for processing...
Quick Checks for Structural Computer Analysis
When working with general structural analysis programs, there are some fast ways to check the input and output. This paper reviews some methods for verification of results of computerized...
A Real-Time Graphical Interface to a Two-Dimensional Groundwater Flow and Mass Transport Model
This paper describes the implementation of a graphical interface to the U.S. Geological Survey's Method of Characteristics (MOC) groundwater flow and mass transport model....
CadVisor (CAD Equipment Analysis and Selection System)
This paper describes a system called CadVisor (CAD Equipment Analysis and Selection System) developed by the U.S. Army Corps of Engineers Construction Engineering Research Laboratories...
A Knowledge-Based Computer System for Financial Wind Risk Management
This paper presents the results of a sponsored applied research project conducted by a multi-disciplinary team to integrate state-of-the-art methods in wind and collateral (e.g., surge,...
The Integrated Systems Approach to Facilities Management
This paper investigates the condition and use of the systems for facilities management and discusses process and considerations for improving the long term value of integrated facilities...
Methods to Reduce the Settlement of Embankments on Soft Clay: A Review
New trends have been observed during the past ten years in the practice of settlement control for embankments on soft clays: they include increased use of rigid (piles) or semi-rigid (stone...
Footing Load Tests on Sand
Four full size footings were load tested at a site in Texas. The embedded footings were situated on a thin layer of stiff clay underlain by a thick deposit of medium dense to dense sand....
Horizontal and Vertical Movements of Bridge Piers Subjected to Ship Impact
Results of a detailed analysis to evaluate the potential horizontal and vertical movements of the piers of George P. Coleman Bridge, Virginia, in the event of ship impact are presented...
Testing and Predicting the Movement of a Drilled Shaft in New Mexico
The New Mexico State Highway and Transportation Department (NMSH&TD) have been using drilled shafts for supporting bridges in the State of New Mexico. Several drilled shafts were...
Numerical Study of Underpinning by Piles for Settlement Control of Strip Foundations
A numerical study has been carried out of a simple idealized problem of a shallow strip foundation (both flexible and rigid) on clay underpinned by rows of piles. The work is directed...
Performance of Nanhua Dam During Construction
The pore pressure response and settlement during the construction of Nanhua dam were studied by several methods, including Hilf's method, laboratory stress path simulation and numerical...
Settlement Analysis of Landfill Liners over Deep Mined Areas
Tensile strains due to differential settlement from past mining activities were evaluated for a landfill liner. The landfill cell encompasses 20 acres and is located on a subsurface profile...
Dynamic Compaction of Landfill Beneath Embankment
This paper presents the results of a highway project where dynamic compaction was used to densify a closed landfill prior to constructing highway embankments over the landfill. The purpose...
Reduction of Settlements Using Soil Reinforcement
This paper presents the experimental and finite element method (FEM) of analyses performed to model the use of soil reinforcement for rehabilitation of gantry crane track foundations....
Return to search