Quantity and Quality of Dry Weather Flow in Las Vegas Valley, Nevada
In recognition of the potential for dry weather flows to convey pollutants from the Las Vegas Valley, the potential economic and resource value of these flows within the Valley, and the...
Application of Environmental Regulations on Design of Hydraulic Structures for Open Cooling Water System
Design of intake and discharge structures for an open cooling water system for a thermal power plant requires that the design of hydraulic structures meets the federal, state, and local...
Hydrologic Design: Extending Traditional Methods
A review of traditional hydrologic design shows that it is inadequate. The continued adaptation of manual techniques into computer software without a major change in fundamental assumptions...
Large-Scale Embankment Overtopping Protection Tests
The U.S. Bureau of Reclamation (Reclamation), Colorado State University (CSU), and the Electric Power Research Institute (EPRI) have an ongoing cooperative research effort to determine...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Selective Withdrawal for Reducing Turbid Water in a Reservoir
This paper deals with improvemental operations of the selective withdrawal facilities as one of the comprehensive technics for shortening the turbid water stay after floods flown into...
Three-Dimensional Modeling of Tides and Wind-Waves
A third-generation coupled discrete numerical wave prediction model is dynamically linked to a three-dimensional hydrodynamic model. The effects of water level, currents, and bottom friction...
An Evaluation of Fiberglass Pipe Made by Three Different Manufacturing Processes for use in Water Transmission Projects
Fiberglass pipe is made primarily using continuous filament wound process, discontinuous helical filament wound process, and centrifugal cast process. Some 40 countries around the world...
The Design and Development of A Road/Rail Power Unit
The road/rail power unit was designed and developed by Saskatchewan Highways and Transportation to provide low cost motive power on low-density disconnected rail lines. The power unit...
Detecting Leaks in Geomembranes
A field-tested leak-location survey, now commercially-available, can provide construction quality assurance or solve a leakage problem in lined landfills, impoundments or tanks. A liner...
Properties of Bottom Ash-Based Composite
High-calcium bottom ash, a by-product of the electric power industry, was evaluated for feasibility of use as a fine aggregate in structural grade concrete. Both fresh and hardened properties...
Active Guideway Systems
Many automated people movers which have been developed or studied in France or in other countries belong to the category of active guideway systems. This paper describes characteristics...
A Public Transport System Based on Light Electric Cars
This paper presents the concept under development in France of a novel transportation system based on fleet of small public cars under supervision from a central computer. These public...
Chicago-O'Hare International Airport Transit System (ATS)
This paper describes the development of the O'Hare Airport Transit System, as well as, the individual subsystem elements which make up the entire system. In addition, the paper also describes...
Denver International Airport AGTS?A Progress Report
Denver International Airport (DIA), the first major airport to be built in the United States in nearly 20 years, is under construction approximately 25 miles (40 km) northeast of downtown...
Automatic Power Factor Correction Equipment?The TrAAm People Mover System
The introduction of the American Airlines' TrAAm project brought numerous modifications to support the addition of guideway, stations and the operation of three-car trains to the existing...
Regeneration?Potentially Powerful Stuff
Virtually all Automated People Movers (APMs) use electrical power for propulsion. Many designs also use electrical braking to augment any mechanical braking devices for decelerating trains....
The Advantages of E & M Systems Procurement
Fifteen years of experience, observations and lessons gained by two of the leading turnkey contractors in the transit and large people mover market have led to the following conclusion:...
Speedy Backfilling for Old Mines
In November 1992, the U.S. Bureau of Mines, in cooperation with the Office of Surface Mining (OSM), used two recently-developed pneumatic backfilling devices to completely fill an abandoned...
Waterpower '93
This proceedings contains the papers presented at the Waterpower '93 conference held in Nashville, Tennessee, August 10-13, 1993. The conference brought together owners, planners,...
Return to search