Research Needs for Extant Iron and Steel Buildings
A brief review of iron- and steel-making processes is background for the development of shapes and codes. Sources of information for the condition assessment of iron and steel buildings...
Continuum Modeling of Periodic Truss Structures
Procedures for deriving equivalent stiffnesses for an extended Timoshenko beam used to represent truss beams are presented. A typical substructure of a truss is used to calculate these...
Effect of Steel Fibers on the Cracking Behavior of Reinforced Concrete Continuous Beams
A research program was conducted with the aim of studying the cracking behavior of reinforced concrete continuous beams, as it is affected by using different combinations of main steel...
Rational Design of Beam-Columns in Steel
The paper discusses the procedure as currently recommended in the AISC Manual for selection of beam-columns in steel and points to the inadequacy of this procedure for quick convergence...
Unsymmetrically Reinforced Concrete Columns
The development of column strength formulas for unsymmetrically reinforced sections has been developed in previous papers. However, aids such as interaction diagrams have not been available...
Probabilistic Basis for Design Criteria in Reinforced Concrete
This collection of papers presents the results of research on the variability of reinforced concrete members carried out at the University of Alberta, Edmonton, Canada, during the period...
Slurry Walls Protect Harvard Square
Harvard Square Station, Cambridge, Mass., had to be rebuilt when Boston's Red Line Subway was extended further out to the suburbs. For the first time, tied back slurry walls...
Beam Analogy for Vertical Curves
The vertical curve is analyzed as a moment diagram for a uniformly loaded single beam with a concentrated moment at one end. This contributes some flexibility in approach, and enhances...
Engineering for Steel Construction
Dome
Roofed with the worlds largest diameter wood dome at 530 ft., the Tacoma Dome, a multi-purpose sports and convention center has helped revitalize a blighted part of that Washington state...
Bascule
The Columbus Drive Bascule Bridge in Chicago is one of the largest bascule bridges in the world with a 270 ft. span and 1l0 ft. width. Four welded steel box girders support each of the...
Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...
Record Concrete Box Girder Spans Houston Ship Channel
The Houston Ship Channel Bridge is an American advancement of the cast in place, post-tensioned, segmentally constructed, concrete box girder design. In spite of the complex and unique...
Structural Analysis of Light-Frame Subassemblies
Conventional light-frame subassemblies have a long history of good performance. Until recently this performance could not be quantified adequately because of the complex ways in which...
An Overview of Structural Panels and Structural Composite Products
Plywood has been the principal structural panel for construction since the late 1940s. Today, structural panels are evolving into products such as composite panels, oriented strand board,...
Wood Trusses and Other Manufactured Structural Components
Roof trusses, floor trusses, wood I and box beams, and glued-laminated timber are discussed. Some of the major recommendations for future research include improved analytical techniques...
Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....
Compression Rings Support Deep Cut
The plans for building the Cuyahoga Valley Interceptor Lift Station in Cleveland, Ohio, called for 126 ft. (38.4 m) by 105 ft. (32 m) construction, some 80 ft. (24.4 m) below grade. Bracing...
Baltimore Borrows Bridge Beams
A look at the construction of the Baltimore Convention Center, its four domelike exhibition halls, the main lobby and its service areas. The Center's four columnless exhibit...
Design and Construction of Long-Span Metal Culverts
Long-span metal culverts are built of corrugated-metal plates bolted together. They have spans exceeding 15 ft. Principal applications include use as drainage structures, grade separations,...
Return to search