Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...
A Discussion of the Numerical Modeling of Sea Ice Ridging
Pressure ridging, is the failure mechanism of the Arctic pack ice in compression. The large-scale compressive strength of the ice pack is determined by the aggregate of ridge building...
Inflation Instability of Cylindrical Membranes
A new procedure which investigates inflation instability of cylindrical nonlinear membranes is developed. The general characteristics of inflation instability are described. An efficient...
Nonlinear Eigensolver for Exact Vibration Analysis
Vibration analysis of structural systems is concerned with accurately predicting the free vibration modes and frequencies of the vibrating system. This analysis process involves two general...
An Expert System for Impeller Mechanical Design and Analysis
Impeller is the most critical component of centrifugal compressors. The mechanical efficiency and durability of the impeller determines the performance of the compressors. The shapes and...
Modal Analysis of Vibration Response for Condition Monitoring of Structures
The response of a structure to load is evidence of what the structure is; of the materials, members, connections and form of the structure. Response is evidence as well of the condition...
Scattering of Waves by Steel Reinforcement in Concrete
The application of wave-sensing methods to the non-destructive evaluation of concrete structures requires often the use of simple (or at least tractable) models for the solution of the...
Numerical Simulations of Diastolic Flow Patterns in a Model Left Ventricle with Varying Degrees of Mitral Stenosis
Blood flow patterns in the left ventricle are undoubtedly influenced by the physical and mechanical state of the natural mitral valve apparatus or the geometry of an artifical valve replacement....
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
An Elasticity Solution for a Transversely Isotropic Material Containing a Spherical Shell Under Arbitrary Axisymmetric Loading
A three-dimensional elasticity solution is obtained for a transversely isotropic solid containing an isotropic spherical membrane shell. Perfect bonding is assumed between the shell and...
Stability of Beams in Eccentrically Braced Frames
As the link yields and strain hardens in an eccentrically braced frame, the beam segment-outside of the link is subject to a combination of high axial force and bending moment. For certain...
Locally Buckled Plastic Hinge Behavior Under Monotonic and Cyclic Loading Condition
In order to clarify the influences of local buckling under monotonic and cyclic loading conditions, experimental studies were carried out on W8x10 A-36 structural steel members subjected...
Investigation of Parametrically-Induced Excitation in Concrete Columns
A mathematical model is developed which accounts for the non-linear material characteristic of concrete members. The axial and transverse motions of concrete columns, are found to be second-order...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Macromodeling of Complex Composites
Dimensionally reduced p-version finite elements based on higher order theory are developed for modeling laminated composite plates and shells in the presence of cracks, notches, and delaminations....
Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...
Design Codes for Lunar Structures
The American Institute of Steel Construction (AISC) Manual of Steel Construction is a codification for the design and construction of steel structures. It includes information, some tabular...
Design Concepts for a Lunar Concrete Production Facility
This paper discusses concrete production fundamentals on the earth and identifies applicable features required for lunar concrete production. Production principles unique to the lunar...
Lunar Oasis
The Lunar Oasis emphasizes development toward self-sufficiency in order to reduce dependence on the Earth for resupply and to enable expansion utilizing indigenous resources. The Oasis...
Return to search