Application of a Beach Plan Evolution Model in Sergipe, Brazil
An offshore breakwater 543 m long located at about 2.4 km from the shore at 10 m of water depth (above chart datums) provides protection to a liquid bulk terminal (Terminal Portuarlo de...

Design of Protective Dunes at Dam Neck, Virginia
Dunes act as a primary coastal defense against inundation in the Netherlands and the Dutch Government has devoted considerable effort towards development of reliable procedures for the...

Articulating Block Mat Revetment for Whaler's Village
The desire of homeowners to live along the California coastline presents the engineer with many unique design opportunities and constraints. Housing built atop coastal cliffs and bluffs...

Observation of the Post-Construction Performance of a System of Groins along an Eroding Beach
A system of six groins was constructed along an eroding coast of reversing sediment transport. This paper describes the performance of the groin system in terms of the evolution of the...

Harbour Development in Southern Part of Thailand
Fishery ports located along the river mouthes in southern part of Thailand were developed by improving their navigation channel to provide acessibility of fishery boats to travel all year....

Wave Barriers: An Environmentally Benign Alternative
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...

An Engineering Assessment of Hydrodynamics and Beach Response at Little River Inlet, NC-SC
The Waterways Experiment Station's (WES) Coastal Engineering Research Center (CERC) conducted an analysis for the U.S. Army Engineer District, Charleston (SAC) of the monitoring data collected...

Design and Construction of Shinnecock Inlet, New York
Shinnecock Inlet is the easternmost of six coastal inlet which bracket the barrier island on the south shore of Long Island, New York. Through recent history, Shinnecock Inlet has exhibited...

South Jetty Scour Hole Stabilization, Ocean City, Maryland
Formation of a scour hole along the inlet side of the South Jetty at Ocean City occurred after jetty construction as a result of ebb tidal flow in the inlet. Analysis of historical bathymetry...

Use of Portable Simulator in Designing Channel Improvements for Port of Brownsville, Texas
The Port of Brownsville, located at the southernmost tip of Texas, serves as an import/export port for both southern Texas and northern Mexico. The proposed channel improvement project...

Case Study of an Offshore Horizontal Boring
A pipeline system was needed to transport natural gas from a discovery in Mobile Block 823 to Mobil's existing system inside Mobile Bay. Sand Island, a small barrier island off Dauphin...

Wave Forecasting for Construction in Mobile Bay
Wave heights were forecast for day-to-day pipeline construction operations in the Main Pass area of Mobile Bay. A low-cost forecasting procedure was developed using the wave generation...

The Talbert Channel Ocean Outlet Project
The Talbert Channel Ocean Outlet Project consisted of relocating and enlarging the outlet of a relatively narrow, shallow flood control channel in Southern California. Noteworthy aspects...

Construction on Wisconsin's Lake Michigan Coast
This paper provides a preliminary evaluation of a set of 100 residential properties along Wisconsin's Lake Michigan coast; an examination of the vulnerability of coastal homes and adequacy...

The Application of Technology to Solving Practical Problems
In this paper, the roles of the scientist, technologist, engineer, and manager are discussed to place them in perspective. A distinction is made between the coastal engineer' and practicing...

Role of the Coastal Engineer in Civil Engineering Practice
Coastal engineering is a specialized discipline of civil engineering that encompasses a wide variety of activities related to harbors, navigation, shore erosion and storm protection. Because...

Value Engineering in Coastal Design
A formal procedure of value engineering can be applied to coastal design to refine a design and reduce the construction costs. Despite the relatively simple technology and materials used...

Environmental Impact Analysis of Coastal Projects
It is fairly routine to describe the range of impacts that might occur as a result of a proposed improvement, but problems and controversy often accompany attempts to answer the more pressing...

Environmental Effects of Beaufort Sea Causeways
Two gravel-fill causeways have been constructed into the shallow nearshore Beaufort sea on the north coast of Alaska for the development of petroleum reservoirs. These long (4-8 km) structures...

Cost Effective Risk Allocation for Coastal Engineering Projects
Project participants will benefit significantly by routinely taking a more systematic, structured, and global view of risk than is sometimes done at present. Enhanced and broadened cognizance...

 

 

 

 

Return to search