A Value Engineering/Risk Analysis Approach to Operation and Maintenance of Hydraulic Structures
Value engineering is an objective, systematic method for minimizing cost of a system. Risk analysis is a method of quantifying uncertainties or probabilities of possible economic loss,...
Estimation of Expected Damages, Indemnification Costs and Joint Probabilities of Dam Failures
This paper describes three methods to evaluate structural options for the rehabilitation of an existing dam using the dollar-denominated risk and capital cost associated with each option...
Forces Acting on a Vortex-Excited Vibrating Cylinder in Planar Oscillatory Flow
An experimental investigation into the vortex-excited vibration of a circular cylinder in planar oscillatory flow has been made with emphasis being placed on the amplification of the forces...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conceptual Evaluation of Dam Safety by Instrumentation
The criteria governing the design of dams can frequently be imprecise. One of the most practical methods of evaluating dam safety in the dam safety surveillance programs is to check the...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
Evaluation of the ARS Low Drop Grade Control Structure
The ARS low drop grade control structure was developed by Little and Murphy to provide efficient energy dissipation and effective grade control for streams in northern Mississippi. The...
Mt. Elbert Pumped Storage Trashrack Failure
The failure of three trashrack sections for unit 2 at the suction-draft tube intake occured after one year in service. However, the trashracks for unit 1 had five years of service with...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
Characteristics of the Flood Release-Induced Vibrations with Qianshui Thin-Arch Dam
In this article the prototype observations and design analyses are described regarding the flood release-induced vibrations of the Qianshui thin-arch dam and its foundation; and their...
Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...
Pump Selection Program and a Better User Interface
Numerous highly innovative computer solutions to engineering problems are of little use to the practicing engineer because these programs are not supported by adequate user interface....
Comparison of Flush and Chamber Mounted Dynamic Pressure Transducer
Modeling of hydraulic structures often includes the measurement of dynamic pressure fluctuations. The accuracy of the pressure measurements depends upon the geometry of the tap. Flush...
Redondo Beach King Harbor Model Studies, California
Redondo Beach King Harbor frequently experiences damage when large winter waves occur in conjunction with high water levels. Damages consist of revetment failure, land erosion, flooding,...
Return to search