Physical Model Study of Navigation Conditions
This paper describes a physical model study performed to assess the impact of increased flows from a redeveloped hydroelectric generating station on the ability of pleasure boats to navigate...

Model Study to Design a Small Intake
A 1:4 scale model was used to design the make-up water intake structure for Burrillville Combined-Cycle Power Plant, Ocean State Power Project. The objective of the study was to assure...

Low-Head Drop Structure Hazards: Modeling of an Abrupt Drop Boat Chute
Low-head drop structures are dangerous for navigational and recreational boating in rivers. In an effort to reduce drowning hazards at low-head river drop structures, a boat chute bypass,...

Hydraulic Modeling of Boating Hazards and Sedimentation?Union Avenue Dam, Denver Colorado
Hydraulic jump type energy dissipators are a hazard to recreational boaters. Many white water boaters have been trapped in 'reverse roller' hydraulic jumps. Numerous...

Characteristics of Flow Pressure Pulsation and Similitude Law of Model
As described in this paper, the characteristics of flow pressure pulsation and similitude law of model are derived from experiments on some prototype dam and serial scales models....

Numerical Modeling of Irregular Hydraulic Jumps
In its simplest form a hydraulic jump characterized by an abrupt increase in the water surface elevation from a depth less than the critical depth, Dc,...

Practical Applications of 2-D Hydrodynamic Modeling
Two-dimensional hydrodynamic modeling capability has greatly impacted the hydraulics community and significantly altered the approaches to design and analysis of open channel systems....

Solving Turbulent Flows with Finite Elements
A finite element computer code using the q - r turbulence model is applied to turbulent flow under a sluice gate. The addition and slow removal of artificial diffusion enhances convergence....

Grid-Induced Errors in Depth-Averaged Flow Fields
A computer code called CH2D (Curvilinear Hydrodynamics in Two Dimensions) for computing depth-averaged free-surface flow fields has been used to assess the impact of the rate of change...

Two-Dimensional Floodplain Modeling
A two-dimensional horizontal finite element numerical model (RMA-2) was applied to a 15 mile (24 km) river channel-floodplain reach in West Germany. Previous applications of such models...

Effect of Barrier Beach Breaching on Harbor Dynamics and Storm Surges
This paper presents a summary of the flood insurance study, commissioned by the Federal Emergency Management Agency, to determine the 100-year flood elevation for Chatham, a seacoast town...

Effects of Tide on Variation of Beach Profile
Effects of tide on variation of beach profile are examined experimentally. It is clarified that tidal effect appears differently when it acts on beach of different profiles. Namely, in...

Cumulative Impacts Analysis on a Midwest Fluvial System
The US Army Corps of Engineers recently completed an analysis of the cumulative impacts of erosion control structures on the Platte River in Nebraska. This was done in response to concerns...

Stabilization of an Alluvial Channel in an Urbanized Area
Grade stabilization structures have been used for many years to control degradation of alluvial stream in the southwest. These structures result in reducing the gradient of the stream...

Flow Separation Around a Solitary Dike: Eddy Viscosity and Mesh Considerations
The hydronamic model RMA-2V has been verified on a variety of global circulation studies. These studies rarely involved separated flow patterns around sudden expansions or contractions....

Mass Conservation in the RMA2V Code
This paper discusses the RMA2V hydrodynamic code with a particular interest in mass conservation problems. These originate from at least two sources. One of which is the slip flow boundary...

Aeration of a Submerged Jet-Flow Gate
Submerged operation of a jet-flow gate requires special treatment of the area downstream from the gate to avoid cavitation damage. The Bureau of Reclamation studied operation of a submerged...

Rainfall-Runoff Forecasting of Desert Flash Floods
A distributed, physically-based rainfall-runoff model has been applied to a 150 km2 semi-arid watershed, and model accuracy is being evaluated with...

3-D Free Surface Flow Modeling by Efficient Finite Element Method
3-D free surface flows in highly irregular boundary configurations are among the most difficult natural phenomena to be simulated by mathematical modeling. Not only the problems of accuracy,...

Discussion of a Three-Dimensional Hydrodynamic Model of the Upper Chesapeake and Delaware Bays
A time-varying three-dimensional (3-D) numerical model of the Upper Chesapeake and Delaware Bays has been developed to address the impact of deepening the Chesapeake and Delaware (C&D)...

 

 

 

 

Return to search