Testing of Admixtures for Seabed Strengthening
Samples from several offshore soil borings in an area of the Beaufort Sea were subjected to laboratory testing to determine the applicability of this method. The soils were mixed with...
Waterfront Stabilization Project, Kaktovik, Alaska
This paper discusses an innovative 384-foot treated-timber cribwall design utilized to control rapidly accelerating thermal erosion and establish a roadway along the bluff on the Beaufort...
Integrated Design of Concrete Flat Plate Structures
An integrated structural design and drafting system for concrete flat plate floor systems is described. This system provides at a single computer workstation the tools necessary to layout...
Hysteretic Behavior of Composite Diaphragms
Floor systems constructed with steel-deck-reinforced concrete are described. When used to resist lateral loads these systems are referred to as diaphragms. A description of a test arrangement,...
Stochastic Response for Tertiary Systems
A modal superposition method is presented for obtaining the response of a single-degree-of-freedom tertiary subsystem mounted on a primary-secondary system. The method is direct in that...
Dynamic Behavior of Full-Scale Wood Diaphragms
Experimental testing of full-scale wood diaphragms has been performed at Washington State University to determine basic dynamic properties. Ten diaphragms, including walls, floors, and...
Performance of an Earthquake Excited Roof Diaphragm
The objective of this paper is to study the earthquake performance of the roof diaphragm of the West Valley College gymnasium in Saratoga, California through a complete set of acceleration...
Research on the Strength Characteristics of Timber Piling
Research on the strength characteristics of wet Southern Pine and Douglas Fir piling and poles is presented. Included are background information on wood's strength characteristics,...
A Multi-User Fender Design and Installation
The increase in damage frequency to the existing Timber Fender System during the change-over from military to commercial/industrial users resulted in a call for design solutions from the...
Notes on Geotechnical Input to the Design of Graving Drydocks
These notes discuss geotechnical considerations in the design of graving drydocks, in particular the floors and walls of the structure. The effect of ground-water conditions in the design,...
CAD Goes into Analysis
In the past, computer analysis of a design was always a separate and distinct step from CAD. Now, an increasing number of systems are combining the two. One system, SSCAD, allows the engineer...
Postmodern Engineering
Momentum Place is a postmodern skyscraper in Dallas designed by architects John Burgee and Philip Johnson. The Datum-Moore Partnership, structural engineers, designed the structural system...
Incorporating Judgment into an Optimization Model of a Wastewater Treatment System
The use of design variable constraints according to textbook and state design standards might cause potentially good designs to be missed and would not capture the fuzzy interaction of...
Investigating and Treating Chromium in Ground Water at a Wood Treater in California
A wood treating facility, operating for more than five years without required permits, contaminated soil and ground water on and offsite. The company moved slowly in response to enforcement...
Evaluation of PCP/Oil Spill on CFT Indian Reservation Near Nespelem, Washington
This paper presents the immediate action taken, the field work performed, and the engineering analysis performed in response to a spillage of a solution of pentachlorophenol (PCP) and...
Restoration of Navy LTA (Lighter Than Air) Hangars
In 1942 and 1943 the Government constructed a series of 16 blimp hangars at ten Naval Air Stations along the east coast, west coast and gulf coast. The hangars erected in pairs housed...
Use of Nondestructive Testing in Rehabilitation of Wood Cooling Towers
State-of-the-art nondestructive evaluation (NDE) techniques, destructive testing, structural analysis, degradation rate models and statistical analysis are combined to optimize a major...
Decay in Wood Structures
One of the main causes of wood deterioration is decay. Decay causes millions of dollars in damage to timber structures each year. Left unchecked, decay deterioration can become a structural...
Case Studies in Upgrading of Wood Trusses and a Heavy Timber Building
Three case studies in upgrading and rehabilitation of wood structures are presented. One case study relates to three 30m (100ft) span bowstring trusses that had to be cut at various span...
Epoxy Repair of a Glulam Beam
The repair of timber structures by epoxy injection techniques is a recently developed repair alternative. Theoretical and experimental studies have resulted in the formulation of design...
Return to search