Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...
Development, Testing and Modeling of Ceramic Composites for Lunar Applications
The procedure referred to as thermal liquefaction allows production of Intermediate Ceramic Composites (ICC) from lunar simulants with various admixtures. For their use as structural materials...
Implementation of a Viscoplastic, Kinematic Hardening Constitutive Model for Impact Prediction
This paper reports on a preliminary study to determine the significance of the Bauschinger effect on modeling impact and other large deformation events. Such events have significant implications...
Erectable Truss Hardware for Large Space Structures
The KATLOK connector is a truss structure connector that was designed to be compatible with manual assembly by an astronaut in an extra-vehicular activity (EVA) suit, telerobotic assembly...
In-situ Extraction of Lunar Soil Volatiles
Techniques for their recovery and utilization of the potentially valuable solar-wind elements embedded in the lunar regolith have been proposed. In order to acquire quantities of 3He...
TOPAZ II Qualification and Nuclear Testing Program
This paper presents an overview of the Topaz II qualification and nuclear test program. The program combines the joint efforts and resources of Russian and American specialists and organizations...
Science Operations and Engineering Impacts to Lunar Outpost Design
Recent work by scientists and engineers at the Johnson Space Center ha led to a better understanding of the requirements and interfaces needed at an initial lunar outpost to enable scientific...
Engineering Implications of Levitating Lunar Dust
In this paper an attempt is made to provide a physical understanding of these various phenomena and their long-term effects on the lunar environment. This understanding is then applied...
Preserve and Protect
Historic and landmark structures constructed of unreinforced masonry and stone are among the most vulnerable to strong ground shaking and are often subject to possible collapse. For the...
The Inelastic Response of an Offshore Platform in Hurricane Andrew
Amoco's Gulf of Mexico South Timbalier 161A platform took a direct hit from Hurricane Andrew in August of 1992, experiencing loads which far exceeded its design load. The platform had...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
Physical Model Tests of Dolos Impact Stresses
An on-going experimental study to determine impact stresses and static nesting stresses in instrumented large scale model dolosse is described in this paper. Seven dolosse were instrumented...
Seismic Analysis of Bridges: Simplified or Refined Approach
This paper discusses the differences of seismic responses of bridges among various analysis methods and approaches....
Bridge Rail Impact Forcing Functions
Bridge rails are designed according to AASHTO standards with a static 10-kip (44.5 kN) lateral load. The computer programs BARRIER VII and COSMOS are used to determine the deflections...
Cumulative Impact of Heavy Permit-Trucks on Steel Bridges
In many parts of North America, special permits are issued to heavy vehicles without considering their cumulative effect on steel bridge components. Such overloads may initiate crack propagation...
U.S. / Japan Large Scale Cooperative Research Program for Steel Structures
The US/Japan Cooperative Research Program Utilizing Large Scale Test Facilities for Earthquake Resistant Design was initiated in 1980 using a combination of full-scale, small-scale, subassemblage...
Impediments to the Implementation of Seismic Isolation
There are over 400 civil engineering structures, worldwide, that have been constructed using the principles of seismic isolation, and 70 of these are in the United States. Although use...
Return to search