Fracture Analysis of Bolted Timber Connections
Application of fracture mechanics concepts to splice connections where bolts load timber members perpendicular to the grain is discussed. Attention is given to prediction of the load level...
Proposed Test Method for Determining Bending Yield Moment of Nails
Current engineering design procedures use a yield theory to establish the nominal resistance (capacity) for laterally-loaded nailed connections in engineered structures. In order to develop...
Validation of the European Yield Model for Nailed Connections
Recent changes in National Design Specification for Wood Construction (NDS) connection design methods make it necessary to validate the European yield model (EYM) for nails. Test values...
High-Strain Kinetic Testing of Deep Foundations
High-strain kinetic testing involves the upward decelerating or accelerating of a mass and using its inertial force to axial prolonged pulse at the head of a pile. Currently available...
Some Aspects of Determination of Pile Capacity by the Wave Equation
This paper presents some new observations made during correlation study of pile capacity computed by wave equation analysis with failure load from static test. In order to determine proper...
Control of Random Crack Formation in Portland Cement Concrete Pavements
Random crack formation in concrete pavements, which is mainly due to the development of tensile stress caused by temperature-induced volumetric change and shrinkage deformation at early...
Dynamic Model for Analysis of Concrete Pavements
A new dynamic finite-element computer program, DYNA-SLAB, for the analysis of jointed concrete pavements subjected to moving transient loads is presented. The structural model for the...
Consequential Fire Loads on Structures
Much less consideration has been given to the performance of modern structural and architectural systems during fires and to the minimization of damage that threatens the integrity of...
Wind Loads on Low Rise Structures: A Survey
Because of the large investment, high rise buildings are usually tested in a wind tunnel to provide the best wind loading information possible. Since low rise structures each represent...
Diaphragm Action of Cladding in Low-Rise Metal Buildings
An investigation of the contribution of cladding to the lateral stiffness of a metal building is presented in this paper. The diaphragm action of the cladding tends to redistribute the...
Uplift Resistance of Plywood and OSB Roof Sheathing
A test program to determine the resistance of plywood and OSB roof sheathing to uplift pressures created by wind flowing over a residential roof structure will provide valuable data to...
NDE for Steel Bridges: FHWA Research, Past, Present and Future
Over the last two decades the Federal Highway Administration (FHWA) has sponsored numerous research and development projects in the area of nondestructive evaluation of steel bridges....
AISI-FHWA Model Bridge Test
The Model Bridge Study involved a large experimental test program to evaluate the behavior of a 0.4-scale model of a two-span continuous plate-girder bridge with modular precast prestressed...
Horizontally Curved Steel Bridge Research-Update 2
Theory and data necessary for the development and calibration of an LRFD based curved steel bridge specification do not presently exist. To address these needs, the Federal Highway Administration...
Time-Dependent Load-Distribution Behavior of Parallel-Member Wood Systems
The effect of differential member creep on the load-distribution behavior of parallel-member wood systems is examined. Variability in the creep response of the individual component members...
Instrumentation and Testing of a Three Hinge Arch for Service Loads Increase
A three hinge arch railroad bridge was instrumented and tested to evaluate its condition and the required modification for increasing the service loads. Initially the structure was designed...
Field Tests of Railway Bridges
A research program focused on the evaluation of railway bridges has been underway for the past five years. The objectives of a research are as follows: (1) determine the loading spectra...
Condition Assessment of Highway Bridges
An application of modal testing and structural identification in the condition assessment of bridges is presented. Damage definition and conceptualization is discussed. Damage detection...
Design Implications of Advanced Analysis in LRFD
This paper discusses two advanced analysis methods, and their use in LRFD format. The first approach is called the notional load plastic hinge method and the second is called the second-order...
Towards Robust, Effective and Efficient Second Order Analysis of Practical Steel Frames
The performance of the widely used finite element and the stability function methods and the recently developed pointwise equilibrating element in second order nonlinear analysis of framed...
Return to search