Climate Change: Is Trouble Ahead for Water Engineers?
Very long range forecasts of future global warming from 2 to 5?C have been made as a result of the increase in carbon dioxide and trace gases in the atmosphere due to man's activities....
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Siting Agricultural Weather Stations
Studies were conducted in Arizona and Washington to investigate how the surrounding fetch affects data collected by agricultural weather stations (AWS). AWS surrounded by extensive areas...
Steel Penstocks
Mechanism of Air Entrainment in Spillway Aerators
The mechanism of air entrainment in the Nappe over spillway aerators was investigated. Turbulence was identified as the main agent for aeration. It was found that Nappe underpressure influences...
Assessment Procedures for Lahars, Mudflows, Debris Flows and Debris Torrents
Unique hydraulic and rheologic characteristics of lahars, mudflows, debris flows and debris torrents require specialized assessment procedures. This paper discusses a fourteen element...
Hydraulic Analysis of the McCook Outlet Manifold
A 1:40-scale model of the proposed McCook Outlet Manifold was tested at the U.S. Army Engineer Waterways Experiment Station (WES). Subsequently, flow conditions in the manifold were calculated...
A Model for Low-Drag Landslides
Field observations and experimental records indicate that the primary mode of motion of many large landslides is that of sliding rather than flowing. Most of the shear during sliding is...
Hurricane Andrew in South Florida: Preparing a Water Management System for Disaster
This paper analyzes Hurricane Andrew from its beginning as a tropical storm to the powerful force that it later became. The careful monitoring that took place throughout its transformation...
Incipient Motion in Gravel-Bed Rivers
Incipient motion processes are reviewed for bed material in gravel-bed rivers. Prediction difficulties are identified. Research results are reported for field and flume studies to investigate...
Computational Hydraulics?The Systems Approach
This paper introduces two modern computational hydraulic computer programs that combine the calculated subcritical and supercritical water surface profiles and pressure gradients in open...
Criticality of Density Intrusions
Previous analyses of density intrusions indicates that a steady interface cannot be maintained if the front propagates at a speed greater than that of long interfacial waves. Supercritical...
Top Width of Pier Scour Holes in Free and Pressure Flow
The maximum top width of the local scour holes at piers is shown to be a simple function of the scour depth and the angle of repose of the bed material in water. Knowledge of the top width...
Preliminary Studies of Pressure Flow Scour
Bridges that become inundated during floods have slightly pressurized flow that impacts bridge piers and creates an aggravated scour condition. Results of two preliminary laboratory studies...
A Model for Vertical Transport at a Sheared Density Interface
A physically based model for vertical mixing and transport at a sheared density interface is presented, based on high-resolution measurements from laboratory experiments. It is found that...
Pressure Relief Under Hydraulic Jump Stilling Basins
Gravity drainage cannot be used for any portion of a structure located below tailwater level. Yet, drainage of this area may be required to relieve sub-floor pressures and reduce the risk...
Drag Characteristics of Coarse Sediment in Clay Suspensions
Drag characteristics of spherical particles in clay suspensions, such as coarse sediment in hyperconcentrated flows, has been analyzed by using a limited data available in the literature....
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
Hydraulic Modeling of High Unit Discharge Energy Dissipators
The incorporation of an efficient and economical energy dissipation device is critical with respect to the safe operation of a high unit discharge spillway. The development and design...
Return to search