Transfer Vehicle Sizing for Missions to Mars
The purpose of this study is to analyze the interactions between mission and vehicle design parameters, and determine how the selection of a particular trajectory and transit time affects...

Marta North Line Midtown Station
This paper presents a case study of a cast-in-place concrete rapid transit station structure. Attention is focused on the performance of the monolithically connected, three-dimensional...

Seismic Performance of Railway Bridges
Historically, the seismic performance of railway bridges in the U.S.A. has been very satisfactory during earthquakes of this century. There are many possible factors contributing to this...

Instrumentation and Testing of a Three Hinge Arch for Service Loads Increase
A three hinge arch railroad bridge was instrumented and tested to evaluate its condition and the required modification for increasing the service loads. Initially the structure was designed...

Field Tests of Railway Bridges
A research program focused on the evaluation of railway bridges has been underway for the past five years. The objectives of a research are as follows: (1) determine the loading spectra...

Three Dimensional Modelling of Estuarine Sediment Transport
This paper describes the sediment transport module in the three-dimensional finite element model TELEMAC-3D which uses the operator splitting technique to solve the shallow water and transport...

A New LAX-WENDROFF Algorithm to Solve the Bed Continuity Equation With Slope Effect
The numerical simulation of mobile bed evolutions of seas, estuaries and rivers requires a morphological model, including the effects of waves, currents and sediment transport, as well...

Effects of Flocculation on Particle Transport
On the basis of previous experimental and theoretical work on flocculation rates and the settling speeds of flocs, an accurate and computationally efficient model of the aggregation and...

The Formation of a Turbidity Maximum in an Estuary
In the present study, a numerical model is used to investigate the transport of sediments in a stratified estuary. The model includes sediment resuspension and deposition as well as three-dimensional,...

A Multi-Dimensional Transport Model Utilizing a Characteristic-Galerkin Approach
A multi-dimensional transport model based on the RMA series of finite element models has been developed utilizing a characteristic-Galerkin approach. This paper examines the application...

Numerical Modeling of Advective and Diffusive Transport in the Rappahannock Estuary, Virginia
A laterally integrated, two-dimensional real-time model, consisting of linked hydrodynamic and water quality models, was developed to study hypoxia in the tidal Rappahannock River, a western...

Environmental Modeling of Coastal Wetlands
Several useful modeling techniques have been developed for the numerical solution of the vertically integrated Reynolds equations on unstructured grids in wetland environments. The objectives...

Issues Related to Modeling the Transport of Suspended Sediments in Northern San Francisco Bay, California
Measurements of suspended sediment concentrations at several deep-channel stations in San Francisco Bay are reviewed. Sediment concentrations are found to be strongly correlated with delta...

Directional Wave Data ? Measurements and Modeling Coast of Florida Erosion and Storm Effects Study
The U.S. Army of Corps of Engineers, Jacksonville District, and the Florida Department of Enviromental Protection are co-sponsors of a study to evaluate the coastal processes along the...

An Experimental and Analytical Study of the Shoreline Response to Non-Parallel Breakwaters in Oblique Waves
REsults of an experimental and analysis study single breakwaters on oblique waves are presented. Three orientations of the breakwaters are studied, those being parallel to the shoreline,...

Modeling Bottom Friction in Wind-Wave Models
Effects of bottom friction in wind-wave models are investigated, with an emphasis on wave-induced bottom roughnesses (moveable-bed effects). A state-of-the-art bottom friction model is...

Airport Terminal Design Challenges
In February 1989, the Metropolitan Washington Airports Authority began the process of designing and constructing a new terminal at Washington National Airport to address the needs of its...

Rail Service to Airports
Rail service is available at seven North American airports, and service is available by a shuttle bus connection at more than nine other North American airports. Additionally, rail service...

Rail-Air: A Multi-Modal Opportunity in a Changing World
The purpose of this Paper is to examine the applicability of rail links to major airports and the benefits they can bring. It will seek to identify the key success factors and the extent...

Switzerland: Rail Access to Airports and the Fly-Luggage System
Swissair and the Swiss Federal Railways (SBB) offer a unique service for air passengers travelling to and from their Swiss airport of departure or arrival. In conjunction with private...

 

 

 

 

Return to search