Reliability Assessment of Pressurized Fuselages with Multiple-Site Fatigue Cracks
Multiple-site damage could cause a catastrophic structural failure of aged aircraft. A reliability analysis is proposed for an assessment of the capability of visual inspection on multiple-site...
A Reliability Analysis of Aerospace Structures Subject to Thermal Mechanical and Flight Loads
Aerospace structures are subjected to various flight loads throughout their service life. In certain anticipated missions, significant thermal stresses will be generated through atmospheric...
Industrial Strength 3-D
Williams assesses the benefits of using three-dimensional computer modeling in the design of industrial structures, comparing the reality in which the computer is a useful tool for engineers...
Recent Advances in Structural Rehabilitation Techniques for Underground Sewer Pipelines
A great challenge for the coming years, if not decades, will be the repair, renovation and renewal of the existing sewerage systems in the Federal Republic of Germany in the interest of...
Uprating an In-Service Offshore Pipeline
The Ekofisk to Emden 36-inch pipeline, transmits gas 275 miles from the Ekofisk field to Emden, West Germany, and has been in operation since 1977. The operator Phillips Petroleum Company...
The NOVA SPAN Bridge System
The NOVA SPAN Bridge concept provides the basis for the design and construction of a new variant in the field of bridges and culverts which, in its performance and operation, incorporates...
Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Failure of Prestressed Concrete Embedded Cylinder Pipe
In 1964, the Ontario Provincial Government undertook to supply water to the City of London (current population 300,000). The supply source was from Lake Huron near Grand Bend, Ontario...
A Look Back in Time to Verify Life Cycle Cost Analyses
The proper engineering design of any hydraulic structure requires consideration of different but interrelated fields of: 1) Planning, 2) Hydrology, 3) Hydraulics, 4) Structural, 5) Installation,...
Structural Safety and Reliability
This proceedings of the 5th International Conference on Structural Safety and Reliability (ICOSSAR '89) held on August 7-11, 1989 in San Francisco, California contains almost...
Museum Showcases the Future
On May 4 in Philadelphia, the Franklin Institute's new wing, called the Futures Center, will open to the public. When the institute's neoclassic main buiding...
The Next Earthquake
The California's October 1989 Loma Prieta earthquake confirmed must of the current research and practice about structural engineering and seismic events. It also highlighted...
Kinematic Models of Extensional Structures: Seismic Implications
Kinematic models can relate faults of different types and different positions within a single dynamic system and thereby offer the potential to explain the disparate seismic activity characteristic...
Approach to Developing a Ground-Motion Design Basis for Facilities Important to Safety at Yucca Mountain
The DOE has proposed a methodology for developing a ground-motion design basis for prospective facilities at Yucca Mountain that are important to safety. The methdology utilizes a quasi-deterministic...
Estimating Earthquake Sizes in the Basin and Range Province, Western North America: Perspectives Gained from Historical Earthquakes
Thirty eight historical earthquake from the Basin and Range province were used to examine three aspects of earthquake size and behavior: 1) the maximum background earthquake, 2) earthquake...
Regulatory Considerations for Designing Surface Facilities for Yucca Mountain High-Level Waste Repository
This paper outlines U.S. Nuclear Regulatory Commission's (NRC's) key regulations applicable to U.S. Department of Energy's (DOE's) design...
Materials Selection Issues for Structural Components of Transportation Casks
Sandia National Laboratories (SNL) is evaluating the use of alternate materials (i.e. other than stainless steel) as structural components in nuclear spent fuel transportation casks. This...
Experience with Certifying Borated Stainless Steel as a Shipping Cask Basket Material
The original cask designs for a cask demonstration project featured fuel baskets constructed of borated stainless steel (bss) as a structural material. The project is intended to demonstrate...
Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...
Site Specific Geologic Interpretations of Richton Salt Dome
There have been numerous investigations into the geological and hydrological aspects of the Richton Salt Dome area since its selection as a preferred site for a nuclear waste repository....
Return to search