ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Evaluation of Near-Field Thermal Environmental Conditions for a Spent Fuel Repository in Tuff
A repository heat transfer analysis is being performed by the Pacific Northwest Laboratory (PNL)^a for the U.S. Department of Energy's...

A Numerical Study of Some Effects of Nuclear Fuel Waste Vault Construction and Closure on Evolution of Groundwater Flow Paths in the Geosphere
We have performed a series of three dimensional finite-element simulations on the sensitivity of the groundwater flow paths and travel times in a conceptual hydrogeological model with...

Three-Dimensional Plume Dynamics in the Vadose Zone: PORFLO-3 Modeling of a Defense Waste Leak at Hanford
In 1973, approximately 450 m³ of liquid containing radioactive and chemical wastes leaked from the 241-T-106 single-shell tank into the vadose zone...

A Stratified Percolation Model for Saturated and Unsaturated Flow Through Natural Fractures
The geometry of the asperities of contact between the two surfaces of a fracture and of the adjacent void spaces determines fluid flow through a fracture and the mechanical deformation...

Study of Fractal Aperture Distribution and Flow in Fractures
This study examines the roughness profiles and aperture distributions of fractures and faults by using concepts from fractal geometry. Simple models of flow of fluid in rough fractures...

Geochemical Modeling: An Integrated Approach to Nuclear Waste Disposal Issues
To meet nuclear waste repository licensing requirements, the response of repository components and of the enclosing host rocks and fluids to temperature fluctuations, fluid flow, radionuclide...

Drill-Back Studies Examine Fractured, Heated Rock
To investigate the effects of heating on the mineralogical, geochemical, and mechanical properties of rock by high-level radioactive waste, cores are being examined from holes penetrating...

Simulation Modeling of Subsurface Development
This paper discusses the use of simulation modeling in analyzing subsurface development activities and estimating associated costs at the Yucca Mountain candidate repository site. Described...

Systems Models for Predicting Radioactive Waste
This paper illustrates how a model can be constructed to analyze the growth of accumulated spent Light-Water-Reactor fuel using a technique from systems theory which has proved to be capable...

Near-Field Modelling for the Safety Assessment of French High-Level Waste Repositories
In assessing the safety of a French high-level waste repository, the fluxes of radionuclides released by the near-field into the geosphere are modelled by the CONDIMENT source code. This...

Optimization Method for Dimensioning a Geological HLW Waste Repository
This method was developed by the CEA to optimize the dimensions of a geological repository by taking account of technical and economic parameters. It involves optimizing radioactive waste...

Trends in Waste Management Program Costs: An Evolution of Estimating Methods and Results
The purpose of this paper is to present a summary of how the program cost projections contained in the five TSLCC analyses performed to-date and the estimating methods used to make these...

Building of a Conceptual Model at the UE25-C Hole Complex
U.S. Geological Survey and Lawrence Berkeley Laboratory are attempting to construct a conceptual model of the UE25-c hole complex. An interdisciplinary approach is discussed where all...

Combined Analytical/Numerical Approaches to Solving Fluid Flow Problems in the Unsaturated Zone at Yucca Mountain
Various analytical and numerical approaches are presented for the study of unsaturated flow processes in the vicinity of the Yucca Mountain, Nevada, the proposed site of an underground...

An Investigation of the Mechanical and Hydrologic Behavior of Tuff Fractures Under Saturated Conditions
The mechanical and hydrologic behavior of natural-fractures in a partially welded tuff rock were investigated. Tuff cores, each containing part of the same natural fracture oriented subparallel...

Diffusion Coefficients and Hydraulic Conductivity in Unsaturated Hanford Soils and Sediments
Two groundwater transport parameters of some Hanford formation materials, the hydraulic conductivity and the diffusion coefficient, were measured to aid in predicting contaminant migration....

Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...

The Role of Sensor Directed, Model-Based Control in Robotic Handling of Nuclear Waste Casks and Materials
This paper discusses the results from several projects at Sandia National Laboratories investigating the application of intelligent machine technologies to remote handling of nuclear waste...

Analysis of RADTRAN Transportation Model
The RADTRAN computer model, used to estimate the risks of transporting waste to a high-level repository, is critically reviewed. Ignoring high consequence accidents, human error, sabotage,...

Multi-Dimensional Modeling of Unsaturated Flow in the Vicinity of Exploratory Shafts and Fault Zones at Yucca Mountain, Nevada
Modeling studies were conducted to determine the potential effects of exploratory shafts on moisture distribution in the vicinity of an exploratory shaft facility, and the potential for...

 

 

 

 

Return to search