Design Criteria for Detention Basins in Urban Drainage
Many communities require the use of detention basins in order to manage the increased runoff discharge in all newly developing watersheds. The authors have shown earlier that the typical...
The Storage Matching Technique of Detention Basin Design
In recent years, use of continuous rainfall - runoff simulation with historic rainfall data has become much more popular for the design of detention basins and reservoirs. While it may...
Criteria for Spillway Design Floods
The procedures outlined in this paper only address the hydrologic safety criteria for spillway design floods. The recommended procedures are based on a careful identification of the social,...
Indemnification Costs in the Dam Safety Decision
The ASCE Task Committee on Spillway Design Floods has proposed safety criteria for three categories of dams. Category 1 dams are those with anticipated failure consequences so large and...
Estimating Low-Flow Frequencies of Ungaged Streams in New England
Equations to estimate low flows were developed using multiple-regression analysis with a sample of 48 river basins, which were selected from the U. S. Geological Survey's...
Safety Design Flood for Too Wide Creek Dam
This paper presents an example application of the procedure developed by the ASCE Task Committee on Spillway Design Floods for a dam on the Too Wide Creek. The example was developed from...
Southeastern Drought of 1986 - Lessons Learned
An interim drought management plan for the Apalachicola-Chattahoochee-Flint (A-C-F) river basin was completed in April, 1985, just in time for testing as the drought developed. Objectives...
The Dallas Floodway Project
This paper explores the history of the Dallas Floodway project, past performance of the project under various flood conditions, recently updated hydrologic and hydraulic evaluations, and...
Monte Carlo Approach to Spillway Design Floods
This paper shows the use of a daily stochastic streamflow model for the calculation of the hydrograph for spillway design. Most of the literature related to the topic deals with the problem...
An Analysis and Comparison of Probable Maximum Floods with 10,000-year Frequency Floods and Maximum Observed Floods for Spillway Design
The use of deterministic probable maximum floods are supported in part by the conclusions of an Interagency Work Group formed to address the following questions: (1) Is it within the state...
Fault-Tolerant Design for Data Acquisition and Flood Forecast Systems
An innovative fault tolerant flood warning system is currently being installed in the Passaic River Basin. The new system is designed to automatically tolerate the failure of major components...
A Comparative Study of Different Base Isolators
A comparative study of the effectiveness of four different base isolators is carried out. The structure is modeled as a rigid mass and the accelerograms of the North-South component of...
Seismic Response of Simple Structures with Coulomb Damping
A single story structure incorporating a floor-sliding mechanism for dissipation of vibration energy through Coulomb friction damping is examined. The response of this structure is evaluated...
Dynamic Behavior of R/C Buildings in Vi? del Mar, Chile
The Chilean earthquake of 3 March 1985 resulted in an effective peak acceleration of 0. 36g in the coastal city of Vina del Mar. The city had an inventory of over 400 reinforced concrete...
Methods for Improving the Seismic Response of Concentrically Braced Steel Frames
This paper briefly reviews various factors contributing to the poor performance occasionally observed in concentrically braced steel frame structures during recent earthquakes. Several...
Unusual Shaped Highrise Buildings in Seismic Zone
The structural concepts, seismic analysis and design of five recent highrise structures are presented in this paper. The paper deals with the problem of multistory buildings having 'structural...
The Design and Construction of the Washington State Convention and Trade Center Over Interstate 5
The Washington State Convention and Trade Center is a 10-level, 1,000,000-square foot facility constructed over Interstate 5 in downtown Seattle. The project spans over three city streets...
Unified Approach to Reliability-Based Structural Optimization
The purpose of this paper is to present a unified approach to reliability-based structural optimization. The emphasis is placed on recent developments in the field including optimal design...
Application of Normal Integration Formulas to Bridge Reliability Analysis
Structural reliability analysis often involves extensive integration of complex multivariable functions. Special techniques can be used to reduce this numerical effort. This paper deals...
Geologic Assessment of Seismotectonic Hazards
Design and modification of dams require evaluation of potential seismotectonic hazards based on consideration of the historic earthquake record and deterministic evaluation of geologic...
Return to search