Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...
Compact Pump Sump Design
This paper details the design criteria chosen to construct a pump sump within several on-site constrictions. The physical size restrictions of the site necessitated the construction of...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Two-Dimensional Finite Element Simulation of the Flooding Characteristics in Kawainui Marsh, Hawaii
This paper summarizes the results from the calibration and application of a two-dimensional finite element model capable of simulating the complex circulation characteristics of Kawainui...
Secondary-Flow Correction for Depth-Averaged Numerical Models
An empirical equation is proposed for the production and transport of secondary (streamwise) vorticity induced by lateral curvature in shallow water. The streamwise vorticity creates a...
Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...
Performance Test of Some Selected Sediment Transport Formulas
Performance of some selected sediment transport formulas was tested using a parameter-sensitivity analysis and a series of numerical experiments with an imaginary channel data. Selection...
Redondo Beach King Harbor Model Studies, California
Redondo Beach King Harbor frequently experiences damage when large winter waves occur in conjunction with high water levels. Damages consist of revetment failure, land erosion, flooding,...
Numerical Modeling of Irregular Hydraulic Jumps
In its simplest form a hydraulic jump characterized by an abrupt increase in the water surface elevation from a depth less than the critical depth, Dc,...
Practical Applications of 2-D Hydrodynamic Modeling
Two-dimensional hydrodynamic modeling capability has greatly impacted the hydraulics community and significantly altered the approaches to design and analysis of open channel systems....
Two-Dimensional Floodplain Modeling
A two-dimensional horizontal finite element numerical model (RMA-2) was applied to a 15 mile (24 km) river channel-floodplain reach in West Germany. Previous applications of such models...
Cumulative Impacts Analysis on a Midwest Fluvial System
The US Army Corps of Engineers recently completed an analysis of the cumulative impacts of erosion control structures on the Platte River in Nebraska. This was done in response to concerns...
Geomorphic and Sedimentologic Evaluation of a Proposed Flood Control Project, Truckee River, Reno, Nevada
Geomorphic observations, sediment data and shear stress analyses were integrated to evaluate the potential responses of the steep, coarse grained Truckee River to a proposed flood control...
The Development of a Plan of Study to Evaluate the Physical and Biological Effects of Increased Navigation Traffic on the Mississippi River
An integrity team prepared a Plan of study (POS) that represents the first comprehensive effort on the Upper Mississippi River (UMR), to identify and quantify impacts associated with commercial...
Mass Conservation in the RMA2V Code
This paper discusses the RMA2V hydrodynamic code with a particular interest in mass conservation problems. These originate from at least two sources. One of which is the slip flow boundary...
Experimental Study on the Hydraulic Characteristic and Trapping Efficiency of a Vortex Tube Sediment Trap
In this paper, an expression of water extractor ratio of a vortex tube has been obtained according to the principle of energy conservation and transformation; based on the feature of sediment...
3-D Free Surface Flow Modeling by Efficient Finite Element Method
3-D free surface flows in highly irregular boundary configurations are among the most difficult natural phenomena to be simulated by mathematical modeling. Not only the problems of accuracy,...
Discussion of a Three-Dimensional Hydrodynamic Model of the Upper Chesapeake and Delaware Bays
A time-varying three-dimensional (3-D) numerical model of the Upper Chesapeake and Delaware Bays has been developed to address the impact of deepening the Chesapeake and Delaware (C&D)...
Numerical Accuracies in Steady Open Channel Flow
The authors have reviewed the accuracy of the individual terms and formulations of the conservation of energy equation as used within the constraints of steady open channel flow modelling....
Momentum and Kinetic Energy Coefficient Research?Ramp Flumes
In October 1984. Reclamation Hydraulic Branch staff members investigated the operation of the A-Canal ramp at Klamath Falls, Oregon. The ramp flume was completed in 1983 as a water measurement...
Return to search