Effect of Connector Spacing on Double Angle Compressive Strength
The 1986 AISC 'Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings' includes new rules affecting the design of built-up members...
Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
Structural Considerations of Cellular Concrete
Although not normally considered to be a structural material, cellular concrete possesses characteristics which may result in its having structural applications in building and structural...
Concrete Shell Design for Membrane Stress
A methodology is presented which covers the design of reinforced concrete shells for membrane stress. The methodology follows the strength design method of the ACI 318-83 Building Code...
Large Reinforced Concrete Active Reclaim Silos
The design and construction of large reinforced concrete shell silos used to provide economical short-term protected storage for coal and lignite in the active reclaim systems of power...
The Ultimate Load Design Method of R/C and P/C Shell
Based on the testing results of 20 full size shells and models, the ultimate load analysis method is proposed to design four different kinds of reinforced concrete shallow shell structures....
Substitute Wind Concept for Elastic Stability of Cooling Tower Shells
The influence of the nonaxisymmetric wind distribution on the stability behavior of cooling tower shells is examined. It is demonstrated, considering about 50 cooling tower shells, that...
Applied P-Delta Methods in the Design Office
At first glance some axioms of a P-Delta analysis appear to be paradoxical. First, the P-Delta effects are a direct function of the depth of the structure parallel to the wind direction....
Practical Application of PR Connections and Second Order Analysis
In the present LRFD Specifications type PR (Partially Restrained) connections are described as those where the connections of beams and girders possess an insufficient rigidity to hold...
Design of Steel Buildings for Second Order Effects
Several methods of calculating corrected effective length factors for unbraced frames are presented and discussed. In addition, an alternate format is suggested for the ASD beam-column...
Second Order Analysis of a 47-Story Building
A modern day second order analysis and ultimate strength review is made of a hypothetical 47-story unbraced frame designed under the 1969 AISC Specification. The original design is part...
Tall Building Stability -- Practical Considerations
Simple techniques for including lateral stability effects in the design of tall buildings are proposed. The application of these techniques in the design of a 66-story building is described....
Frame Stability - A Canadian Designer's Approach
The deficiencies and fallacies of the simplistic effective column length approach to frame stability are demonstrated through its application to a 57-story rigidly framed building structure....
Reliability of Structural Systems With Multiple Limit States
The purpose of this paper is to present a systematic treatment of the reliability of structural systems with multiple limit states. Several performance criteria (e. g. , excessive deflection,...
Building High Tech in China
The tallest steel structure in the People's Republic of China is being built by an international complement of designers, suppliers, vendors and contractors. It is the 42...
Highway Safety Analysis and Monitoring
The Highway Safety Analysis and Monitoring (HISAM) software was developed under a Federal Highway Administration research contract and is designed to aid local agencies with data base...
Transportation Network Building Using a CAD Interface
This paper illustrates how Barton-Aschman Associates, Inc, has made use of AutoCAD(TRADEMARK) on the microcomputer to digitize an existing highway network and to create a new network from...
NEDS?Network Editing and Display for TRANPLAN
This paper explores some of the current and possible future applications of interactive graphics packages to the tasks of analyzing and planning transportation systems. The source of the...
Return to search