On Stochastic Decomposition and Its Applications in Probabilistic Dynamics
The frequency domain analysis concerning the response of cascade-nested multiple input/output systems requires computation of the cross-spectral density matrix involving the input, intermediate...
Dynamic Stability of Cable Domes
The cable domes designed by David Geiger for the gymnastics and fencing arenas for the Olympics at Seoul, Korea, and for the stadium at St. Petersburg, Florida, are geometrically non-linear...
The Extreme Value Distribution of Non-Stationary Vector Processes
In this paper the extreme value distribution of functions of non-stationary vector processes is studied. For these processes asymptotic approximations for the crossing rates through hypersurfaces...
Non-Gaussian Closures For Non-Linear Finite Element Modelled Structures
In the framework of the finite element (FE) method, by using the 'total Lagrangian approach', the stochastic analysis of geometrically non-linear structures is...
Dynamic Reliability of Multi-Degrees-of-Freedom Structures with Hysteretic Characteristics Under Combined Random Loads
A method to estimate the dynamic reliability of hysteretic structures under combined loads is investigated. The response statistical moments of structures, with hysteretic characteristics...
Response Variability of Isolated Structure Due to Randomness of Isolation Devices
Effect of randomness of restoring characteristics of an isolation device, which is considered to result from the randomness of material properties, configuration and setting error, on...
Detection of System Nonlinearity
A method for detection of linear/nonlinear characteristics of mechanical systems excited by stationary Gaussian processes is presented. Linear systems under consideration show always a...
Higher Moments Descriptions of Uncertain Quantities in the Analysis of Structural Components
Maximum-entropy and asymptotic models for probability densities with application to the uncertain behavior of a structural component are considered. In particular, they are studied with...
System Identification Methods for Fault Detection and Diagnosis
Faults refer to any unexpected changes or modifications of existing structures resulting from extreme loads or other abnormal loading and environmental conditions. Such faults may effect...
Statistical System Identification of Structures
A general unifying approach to system identification is presented within a Bayesian statistical framework to explicitly treat the inherent uncertainties. It is shown that selecting the...
Experience in Model Adjustment by Parameter Estimation Methods
If the computational model is uncertain and if measured data of the system exist, system identification approaches lead to an improved computational model with known confidence. After...
Identification of Bilinear Severely Hysteretic Systems
An identification method is investigated on bilinear severely hysteretic systems subjected to a strong earthquake motion by means of the Extended Kalman Filter incorporated with a weighted...
Active Control of Structures Under Stochastic Base Excitation with a Predominant Frequency
Active control of structures under stochastic base excitation is investigated. The synthesis of an active control system discussed in the study is based on the use of stochastic control...
On the Adequacy of Linearized Methods for Control of Nonlinear Bridge Oscillations
In this paper, control of nonlinear oscillations of a single-span flexible bridge with light damping is examined to improve bridge safety and reliability. The control forces are applied...
Reliability of Control Systems of Building Structures by Active Tendons
In this paper, a numerical assessment on the reliability of a control system of building structures by active cables is performed. Some control experiments on a 23-story shear-wall building...
Safety Evaluation of a Tall Building
This paper uses the extended Kalman filter to perform the system identification of a tall building with the aid of recorded accelerograms obtained from strong-motion seismographs. The...
Application of Probabilistic Approach for Crack Growth Damage Accumulation in Metallic Structures
Two stochastic crack growth approaches (i.e., 'general' and 'analytical') are presented and evaluated for predicting the crack growth...
Reliability Analysis of Weldings Considering Defects
The welds generally represent the most critical part of large structural systems, i.e. offshore structures. Hence they affect significantly the structural reliability. A realistic model...
Potential Applicability of Mathematical Statistics in Stochastic Modelling of Failure Phenomena
Failure phenomena should be investigated clearly with a good understanding of engineering uncertainties associated with strength of the material as well as randomly applied load. In this...
Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...
Return to search