ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Cause of the Johnstown Flood
The Johnstown flood occurred in 1889, when an earth and rock dam failed during a record rainfall in eastern Pennsylvania. The flood was one of the worst civil disasters in the U.S.; 2,200...

Microcomputer Knowledge-Based Expert Systems in Civil Engineering
This book contains sixteen papers presenting applications of expert system technology to civil engineering problems with emphasis on microcomputer implementations. It is divided into four...

Geotechnical Aspects of Karst Terrains
Exploration, Foundation Design and Performance, and Remedial Measures
The presence of solution cavities in karst terrains poses some unique problems in site exploration, design of foundations, and in remediation of problems with existing structures. Case...

Accommodation of Trucks on the Highway
Safety in Design
This book contains the papers presented at the symposium on accommodation of trucks on highways held in Nashville, Tenn., May 11, 1988. The papers address highway factors that contribute...

Evaluation Procedures for Hydrologic Safety of Dams
Procedures are proposed for selecting the safety design flood for both new and existing dams. The procedures are based on a quantitative risk assessment in which the likelihood and consequences...

A Summary Description of Design Criteria, Codes, Standards, and Regulatory Provisions Typically Used for the Civil and Structural Design of Nuclear Fuel Cycle Facilities
A summary of design criteria, codes, standards, and regulatory provisions applicable to the civil and structural design of the eight principal facilities of the nuclear fuel cycle are...

Needed Social, Cultural and Design Changes to Successfully Manage Nigerian Surface Irrigated Projects
The aim of this paper is to illustrate the broad nature of problems associated with the faulty initial designs of water distribution network and irrigation methods and poor participartion...

A Method for `Warped Surface' Land Forming Design
Most approaches to land forming are based on a plane surface design which in some cases may result in prohibitive costs or excessive removal of top soil....

Bulk Stomatal Resistance in Operational Estimates of Evapotranspiration
General relationships for estimating canopy or bulk stomatal resistance and aerodynamic resistances of grass and alfalfa reference crops for use in the Penman-J.L. Monteith equation are...

Stable and Environmental Channel Design
The Wildcat and San Pablo Creeks Flood Control Project is located in Richmond, California. Both streams flow through a highly urbanized area, periodically overflowing their banks and causing...

Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...

Computer Aided Hydraulic Design of Open Channels
Over a 10 year period, the computer program, WASURO, was developed by the U.S. Army Corps of Engineers District, Los Angeles (LAD), which utilized many of the criteria of the previously...

Power Formula for Open-Channel Flow Resistance
This paper evaluates various power formulas for flow resistance in open channels. Unlike the logarithmic resistance equation that can be theoretically derived either from Prandtl's...

Southwestern Drainage Litigation
In this paper, three technical sources of drainage litigation are examined. First, in the overall sparsely but locally densely populated Southwest, there is a severe lack of precipitation...

Design Depths and Velocities on Alluvial Fans
Under Federal Emergency Management Agency (FEMA) guidelines, flood depths and velocities on alluvial fans are determined by considering the probability of a given point on the alluvial...

Design and Evaluation of Storm Water Detention Facilities Using a Design Storm and Probable Maximum Storm
When designing a storm water detention facility, both a design storm (DS) and a probable maximum storm (PMS) should be considered. The DS is used to design the facility. The PMS is used...

Features of Flow in Slurry-Thickening Ponds
The study reported was undertaken to investigate the physical processes which come into play in settling-pond slurry thickeners and causes their behavior to deviate from those included...

Hydraulic Design for La Quinta Stormwater Project
An upstream detention basin was designed to trap debris and attenuate flows into Bear Creek Channel. The high velocity supercritical flow made a one side bank protection design for the...

Stochastic Streamflow Sequences for Reservoir Operation and Design
A stochastic streamflow model is adapted for risk methodology in the operation and design of reservoirs. The model is based upon the representation of the flood series as a Poisson counting...

Scour Downstream of the Straight Drop Spillway
Tests made to determine the effect of high tailwater and long duration flows on scour downstream of the straight drop spillway stilling basin are presented in this paper. Results are presented...

 

 

 

 

Return to search