ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

System Impacts on MRS Operations
This paper describes the results of analyses conducted to evaluate impacts on monitored retrievable storage (MRS) operations and design resulting from possible changes in the CRWMS Reference...

Simulated Hanford Waste: A Study of Physical Properties, Gas Retention, and Gas Generation
This study helps to establish the physical and chemical processes responsible for the generation and retention of gases within high-level waste contained in Tank 101-SY on the Hanford...

Photothermal Deflection Spectroscopy Investigations of Uranium Electrochemistry
Photothermal deflection spectroscopy (PDS) has been successfully applied to the study of uranium oxide electrochemistry. A brief description of PDS and preliminary results that demonstrate...

Assessments of System Impacts of Spent Fuel Thermal Characteristics and Emplacement Rates
Analyses conducted to evaluate the impacts spent fuel thermal characteristics and emplacement rates might have on the thermal conditions in a candidate geologic repository at the Yucca...

Verification of Shielding Analysis for Spent Fuel Storage Casks
Casks of type CASTOR are used for transport and storage of spent LWR fuel assemblies. The purpose of the present work is the verification of shielding design analysis methods by application...

Recent Developments in Stochastic Modeling and Upscaling of Hydrologic Properties in Tuff
A set of detailed geostatistical simulations of porosity has been produced for a layered stratigraphic sequence of welded and non-welded volcanic tuffs at Yucca Mountain, Nevada. The simulations...

Dependence of Radionuclide Sorption on Sample Grinding Surface Area, and Water Composition
Experiments are described that were designed to quantify the dependence of sorption properties and surface area on the crushed-particle size of the rock samples used in batch sorption...

Fission Product Distribution in Nuclear Test Cavities/Chimneys
When a nuclear device is exploded, residual radioactive material is distributed throughout the resulting underground cavity and rubble chimney. Refractory materials are more concentrated...

Thermal-Hydraulic Analyses of Molten Glass in a Joule-Heated Melter
Physical modelling using glycerine and three-dimensional mathematical modelling were executed to study temperature and flow profiles of molten glass in the melter for the vitrification...

A Numerical Analysis of Spent Nuclear Fuel Thermal Characteristics
A numerical analysis is presented comparing the thermal behavior of a spent boiling water reactor fuel pin and an electric heating element intended to simulate the fuel pin in an experimental...

Numerically Predicting Horizontally Oriented Spent Fuel Rod Surface Temperatures
A comparison between numerical calculations with use of commercial thermal analysis software packages and experimental data simulating a horizontally oriented spent fuel rod array was...

A Homogeneous Equilibrium Model for Analysis of Spent Fuel Shipping Containers
Transportation of nuclear spent fuel is inevitable over the coming years. However, in order to ensure the safety of such transport, computational models must be established, which are...

Robust-Multibarrier Waste Package Thermal Evaluation
One of the key issues to be addressed in developing a successful permanent radioactive waste storage concept is the thermal effect due to the spent nuclear fuel (SNF). The thermal output...

Characterization of Porosity in Support of Mechanical Property Analysis
Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of...

Large-Scale in Situ Heater Tests for Hydrothermal Characterization at Yucca Mountain
To safely and permanently store high-level nuclear waste, the potential Yucca Mountain repository site must mitigate the release and transport of radionuclides for tens of thousands of...

Development of Bioretention Practices for Stormwater Management
This paper introduces the concept of bioretention as an innovative stormwater quality management practice. Bioretention is a method to treat the first flush of runoff using a combination...

Design Considerations Associated with Bioretention Practices
This paper presents the design requirements of bioretention practices. Bioretention is a stormwater management practice using a combination of retention, native terrestrial vegetation...

Optimization of Operations?The Manitoba Hydro Experience
As part of a decision support system, Manitoba Hydro implemented a comprehensive optimization model for operations planning in the mid 1980's (Barritt-Flatt and Cormie 1991). Since that...

Non Contact, Remote Sensing of Buried Water Pipeline Leaks Using Infrared Thermography
Subsurface water pipelines, sewer and buried utilities throughout America and the rest of the world range in age from hundreds of years old to brand new. They all have, however, one fact...

The Impact of Global Warming on Water Resources: Overview and Implications for Coastal California
In the past two years, impressive evidence has accumulated that global warming is occurring and is related to the increase in greenhouse gasses. The impact of the warming process on water...

 

 

 

 

Return to search