Construction with Large Stone
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 13 This manual provides guidance on effective and economical...
Landslides under Static and Dynamic Conditions
Analysis, Monitoring, and Mitigation
It is important to consider both the geotechnical engineering and the engineering geology implications of static and dynamic behavior of landslides. In studying landslides one must consider...
Waste Containment Facilities
This book presents a comprehensive description of recommended procedures for construction quality assurance (CQA) and control (CQC) for waste containment facilities. Chapter 1 describes...
Freeway through a Superfund Site
The Red Mountain Freeway is the centerpiece of a 171 km $2.6 billion system of freeways and expressways under construction in Maricopa County, Ariz. For 3 km in Tempe, the freeway passes...
A Second Life for Dredged Material
To ensure safe, navigable waters, rivers and waterways must be dredged. Dredging in the U.S. requires long-term alternatives for placement of more than 300 million cu yds of dredged material...
Rising from the River
The Corps of Engineers completed construction of a 20 Million cu yd dredged material containment facility in the Delaware River in 1990. The authors examine the performance of the geotextile...
Reliability and Response Control of R/C Buildings
A damage model is summarized for the assessment of seismic damage of reinforced concrete structures. The model is to evaluate specific buildings that were damaged in Mexico City during...
Human Extender: A Material Handling System
A human's ability to perform physical tasks is limited by physical strength, not by intelligence. `Extenders' are a class of robot manipulators worn by humans to augment human mechanical...
Conceptual Design and Characteristics of A Dual-Arm Cam-Lock Manipulator
Recent developments in the area of smart structures indicate that variable geometry/stiffness truss network is of fundamental importance in designing smart transformable structures and...
A Mobile Robot for Reconnaissance of HAZMAT Incident Sites
First entry into situations where hazardous materials have been accidentally spilled or released is extremely dangerous. Often the type of material, its exact location, and the extent...
Environmental Hardening of a Mobile-Manipulator System for Nuclear Environments
The research report involves the radiation hardening of a commercially-available, mobile robot, the REMOTEC ANDROS. This hardening effort will culminate in the availability of a mega-rad...
Advancement of Material Handling Technologies for In-Place Asphalt Pavement Recycling
New technologies for asphalt pavement resurfacing are improving dramatically with the advancements being made to related equipment technologies. This paper focuses on the recent developments...
Real-Time Control for a Robotic Rebar Bender
Job conditions and variability in the properties of the stock material combine in a rebar bending operation to create a challenging environment for a robotic bender. This paper reports...
Bechtel Automated Lift Planning System
This paper describes the Automated Lift Planning System (ALPS) software developed by Bechtel Corporation. The software was developed to assist the construction engineer with planning and...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Dynamics of Laminated Plates with Layer Waviness
Composite structures usually exhibit a high strength-to-weight ratio as compared to traditional structural materials. This makes them attractive solutions in many aerospace applications....
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Nonlinear Analysis of Stiffened Laminated Cylindrical Shells Using the Layerwise Theory of Reddy
The layerwise shell theory of Reddy is used to develop the buckling and the postbuckling equations of circular cylindrical shells reinforced by means of axial and ring stiffeners and subject...
Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...
A Membrane Structure for a Lunar Assembly Building
This paper describes potential design options and construction approaches for the development of an inflatable membrane structure of non-circular cross section. This structure could be...
Return to search