The Proof is in the Pavement
A technique known as statistical quality assurance (SQA) lets DOTs quantify pavement quality by setting statistical guidelines for the work they will accept. SQA is a distinct departure...
Use of High Strength By-Product Gypsum Bricks in Masonry Construction
A new research aimed at producing high strength masonry bricks to be bonded with several types of joint materials other than conventional cement mortar, is introduced in this paper. This...
Use of CLSM Fly Ash Slurry for Underground Facilities
This paper presents the results of research performed in developing and using flowable fly ash slurry which falls under the classification of Controlled Low Strength Material (CLSM) as...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
Lime Treatment of Asphalt Mixtures in Improving Resistance to Moisture
Airport flexible pavement is susceptible to moisture damage. Lime treatment of asphalt pavement is considered to be an effective method in improving resistance to moisture. It has been...
Generic Problems
Generic Problems are basic problems in structural mechanics that recur frequently, have been investigated experimentally and involve the behavior of elements or components found in many...
Seismic Design of Multi-Story, Wood-Framed Buildings
The seismic design and analysis of wood-framed structures is relatively simple; however, the challenges that present themselves within this design medium are shear and overturning force...
Flyash Stabilization of Tropical Hawaiian Soils
A preliminary study of soil improvement/stabilization of several tropical Hawaiian soils with locally generated high quality flyash admixtures has shown tremendous potential as an economical...
Lime Sludge Amended Fly Ash for Utilization as an Engineering Material
Sludges generated from various water treatment operations are predominantly subject to the fate of land disposal. To prepare sludges for land disposal typically requires time consuming...
Verification of Deep Foundations by NDT Methods
Deep foundations are designed using static analysis techniques and the soil strength and structural integrity are then confirmed by static load tests. However, static tests are time consuming...
Perimeter Load Transfer in Drilled Shafts in the Eagle Ford Formation
Results of six full-scale compression loading tests at four sites in the Dallas area are considered. Compressive strengths (qc) of the rock varied...
On the Elasto-Plastic Behavior of an Unsaturated Silt
Due to technical difficulties related to the control and measurement of the suction in unsaturated soils, few experimental data on the mechanical behavior of those soils exits. The paper...
Strength Design for Reinforced-Concrete Hydraulic Structures
A Review of Design Criteria for High RCC Dams
The 1980s could be considered to be the decade during which roller-compacted concrete dams came of age. This economic method of construction is sufficiently proven that very large dams...
Designing Reinforced Rock
The reinforced rock arch design method has been used to stabilize coal mine excavations for 40 years, but so far has been applied to only a few tunnels. The use of rock reinforcement develops...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
A Critique of the Ultrasonic Pulse Velocity Method for Testing Concrete
The pulse velocity method is the most widely used ultrasonic nondestructive method for assessing concrete quality. However, it has been well established that the relation between ultrasonic...
Evaluation of Compressive Strength for High-Strength Concrete by Pulse Velocity Method
Development of compressive strength and pulse velocity for high-strength concrete from the age of 5 hours are studied in relation to cementitious material types and curing conditions....
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Collective Excellence
Building Effective Teams
Return to search