Agricultural Drains and Safety of Dams
Bonny Dam is located in east central Colorado on the South Fork Republican River. The dam's foundation is in the relatively porous Ogallala formation. Throughout the history of the dam,...
Design and Maintenance Factors Affecting Application Uniformity of Low Pressure Center-Pivot Irrigation Systems
Uniformity tests were conducted on 30 center-pivot sprinkler systems installed with one of six different low pressure nozzle types or high pressure impact sprinklers. Well designed and...
Case Studies of Semi-Closed Pipeline Systems for Flexible Deliveries
The semi-closed pipeline system using the best aspects of the open and the closed pipeline systems, has many applications. It is the best adapted system for use with the variable flow...
Pile Driving: Can it Cause Slope Movement?
The potential for slope movement from pile driving is examined in this paper. Published information is reviewed to identify the primary causes of movement, which are 1) displacement of...
Assessment of Derived Flood Frequency Distributions
Derived flood frequency distributions based on the geomorphologic IUH are evaluated in this work. Two existing approaches, the methods of Hebson and Wood (1982) and Diaz-Granados et al....
A Storm Water Utility Case Study, Salt Lake City, Utah
In response to financial pressure on the City's general fund and the EPA's storm water regulations, Salt Lake City went through the process of developing and implementing a storm water...
A More Rational Approach to Pavements
It is the intent of this paper to demonstrate how purely probabilistic arguments can be used to formulate a rational (phenomenonological) model of the particulate media that comprise pavement...
Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...
The Desalination Situation
Rapid growth is putting increasing pressure on water supplies in coastal communities. Conservation can only do so much, and providing new freshwater supplies is getting more expensive...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
A Fourier Series Solution to Bottom Roughness Induced Stresses During Pipe Laying
Often during installation, a subsea pipeline must be laid along seabed portions with rough profiles. The pipeline is forced by the bottom irregularities to bridge across consecutive protuberances....
Pressure Pipeline Design for Water and Wastewater
This committee report,
A Laboratory Study of Shock Waves in Frozen Soil
This work has focused on two aspects of dynamic behavior of frozen soil: first, on the shock pressure attenuation, and second, on the shock Hugoniot. The use of long bars of frozen soil...
A Conceptual Model for Vertical Frazil Distribution in Turbulent Flows
A conceptual model is presented for the evolution of frazil over depth in a turbulent flow. The net upward migration due to buoyancy of the frazil is opposed by intermittent mixing induced...
Small-Scale Meteorology of Freezing Precipitation
Freezing rain and glazing are extremely disruptive to transportation, communication and power transmission. Local variations in the occurrence of freezing rain may be difficult to forecast....
Effective Pressures Measured During Indentation Tests in Freshwater Ice
Indentation tests were conducted by pushing flat, vertical indentors of two different widths (50 and 100 mm) against the edges of floating, freshwater ice at different velocities (0.6-150...
Effect of Material Heterogeneities on Flow Through Porous Media
Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations...
A Probe Method for Measuring In Situ Rock Thermophysical Properties
The application of a thermal probe method for in situ thermophysical property measurement is analyzed. The REKA method (Rapid Evaluation of k and alpha) involves a single-borehole probe...
Durability, Mechanical, and Thermal Properties of Experimental Glass-Ceramic Forms for Immobilizing ICPP High Level Waste
The high-level liquid waste generated at the Idaho Chemical Processing Plant (ICPP) is routinely solidified into granular calcined high-level waste (HLW) and stored onsite. A research...
Return to search