The Design and Development of A Road/Rail Power Unit
The road/rail power unit was designed and developed by Saskatchewan Highways and Transportation to provide low cost motive power on low-density disconnected rail lines. The power unit...
Accessibility of Geotechnical Earthquake Engineering Data and the Need for Data Storage and Dissemination Standards
Ease of data access and data standards are two issues critical to the success of GIS technology when applied to earthquake hazards research problems that require geotechnical engineering...
Detecting Leaks in Geomembranes
A field-tested leak-location survey, now commercially-available, can provide construction quality assurance or solve a leakage problem in lined landfills, impoundments or tanks. A liner...
Assessment and Repair of Fire-Damaged Concrete Structures
Concrete, even though it may be the most fire-resistant of all the major building materials, can be damaged by fire. Seldom does even a major fire cause total destruction, however, most...
Properties of Bottom Ash-Based Composite
High-calcium bottom ash, a by-product of the electric power industry, was evaluated for feasibility of use as a fine aggregate in structural grade concrete. Both fresh and hardened properties...
Active Guideway Systems
Many automated people movers which have been developed or studied in France or in other countries belong to the category of active guideway systems. This paper describes characteristics...
A Public Transport System Based on Light Electric Cars
This paper presents the concept under development in France of a novel transportation system based on fleet of small public cars under supervision from a central computer. These public...
Chicago-O'Hare International Airport Transit System (ATS)
This paper describes the development of the O'Hare Airport Transit System, as well as, the individual subsystem elements which make up the entire system. In addition, the paper also describes...
Automatic Power Factor Correction Equipment?The TrAAm People Mover System
The introduction of the American Airlines' TrAAm project brought numerous modifications to support the addition of guideway, stations and the operation of three-car trains to the existing...
Regeneration?Potentially Powerful Stuff
Virtually all Automated People Movers (APMs) use electrical power for propulsion. Many designs also use electrical braking to augment any mechanical braking devices for decelerating trains....
The Advantages of E & M Systems Procurement
Fifteen years of experience, observations and lessons gained by two of the leading turnkey contractors in the transit and large people mover market have led to the following conclusion:...
Seismic Design of Multi-Story, Wood-Framed Buildings
The seismic design and analysis of wood-framed structures is relatively simple; however, the challenges that present themselves within this design medium are shear and overturning force...
LRFD for Timber Structures
The use of load and resistance design (LRFD) methodologies is increasingly becoming the standard analysis procedure for engineering design. The concrete industry has used a variation of...
Structural Fire Resistance Design of Wood Beams and Columns: A Comparison of European and North American Practices
North American and Eurocode design methods for fire-resistive exposed wood members provide a very good example of the translation of research into practical engineering design procedures....
Drilled Shaft Side Resistance in Clay Soil to Rock
An evaluation is made of available field load test data for the axial side clay soils to hard rocks. Conventional total stress interpretations by the alpha method are used to examine the...
Side Resistance of Drilled Shafts in the Denver and Pierre Formations
Results of load tests on drilled shaft foundations in Upper Cretaceous shales are described and evaluated. Three load tests were conducted on shafts in the Denver Formation, in Denver,...
Behavior of Instrumented Model Piers in Manufactured Rock with a Soft Layer
A laboratory test apparatus has been used to study the side resistance of piers socketed into manufactured soft-rock masses. The results of four tests are reported, three of which included...
Strength Design for Reinforced-Concrete Hydraulic Structures
21st Century Timber Engineering
Timber engineering is moving into the 21st Century faced with challenges in technology, governmental mandates and environmental concerns. Engineers are continuously being challenged in...
Waterpower '93
This proceedings contains the papers presented at the Waterpower '93 conference held in Nashville, Tennessee, August 10-13, 1993. The conference brought together owners, planners,...
Return to search