ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Soil-Pile-Superstructure System in Liquefaction
To obtain the dynamic behavior of the soil-pile-superstructure system in a liquefied sand layer, shaking table tests by using large scale shear bin (4m in length, 2m in width and 2m in...

Application of Fracture Mechanics Methodology to Assessment of Weld Defects in Offshore Platforms
This paper demonstrates an application of both deterministic and probabilistic fracture mechanics methods to assess weld defects in an offshore platform. The results of the assessment...

A Fourier Series Solution to Bottom Roughness Induced Stresses During Pipe Laying
Often during installation, a subsea pipeline must be laid along seabed portions with rough profiles. The pipeline is forced by the bottom irregularities to bridge across consecutive protuberances....

Single Pile and Pile Group in Permafrost
The results of laboratory and field experiments on single pile and pile group behaviour in frozen soils are reported. It was shown that the character of soil deformation was influenced...

Friction and Cohesion in Ice Rubble Reviewed
An argument is ventured that accumulations of ice rubble undergoing continuous shear deformation are essentially cohesionless. In terms of the Mohr-Coulomb failure criterion, therefore,...

On the Constitutive Behavior of Single Ice Crystals Due to Dislocation Mechanisms
A three-dimensional constitutive relation is derived for single ice crystals. The formulation is developed in terms of dislocation processes on the basal, prism, and pyramidal planes....

Microstructure and Mechanical Behaviour of Ice
Short descriptions are given for ice in nature, test methods used to evaluate their deformation behaviour and, a general microstructure-based constitutive equation. Equations suitable...

Fractal Crushing
This paper develops an approach to a two-dimensional fragmentation process, in which floating ice floes are driven against each other and break up into smaller floes. It first considers...

Size Effects in the Fracture of Quasi-Brittle Materials
Causes and influences of the structural size effect that is exhibited by materials such as concrete, mortar, ice rock and ceramics, are discussed. The size effect law, which models this...

Some Questions on Fracture Mechanics of Ice and Ice Covers
Investigation of natural processes of deformation and fracture of ice covers, and processes of its interaction with icebreaker or ice-resistant structures requires as a rule considerations...

Effective Pressures Measured During Indentation Tests in Freshwater Ice
Indentation tests were conducted by pushing flat, vertical indentors of two different widths (50 and 100 mm) against the edges of floating, freshwater ice at different velocities (0.6-150...

Structural Approximations in Multi-Story Buildings
Simplified computer analyses and various approximate hand calculation methods are extremely valuable in structural engineering for multi-story buildings both during the preliminary design...

Analysis and Design of Structures with Outrigger Arms
Although sophisticated computer methods are available for analyzing an entire building structure, there is a need for simplified methods (a) for checking the accuracy of the computer analyses,...

Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...

Mechanical Anisotropy of the Yucca Mountain Tuffs
Three series of measurements were performed on oriented cores of several Yucca Mountain tuffs to determine the importance of mechanical anisotropy in the intact rock. Outcrop and drillhole...

Application of Discrete Feature Analysis to Repository Characterization
Rock mass heterogeneity plays an important role in the hydrologic and mechanical behavior of radioactive waste repositories. This heterogeneity is, in turn, strongly influenced by the...

Fractal Characteristics of Fracture Roughness and Aperture Data
In this study mathematical expressions are developed for the characteristics of apertures between rough surfaces. It shown that the correlation between the opposite surfaces influences...

Design and Operating Criteria of the French Deep Repository for High Level Radioactive Waste
The design and operating criteria of the French geologic repository for high level radioactive waste (HLW) were selected for their contribution to operational and long-term safety, as...

A Probe Method for Measuring In Situ Rock Thermophysical Properties
The application of a thermal probe method for in situ thermophysical property measurement is analyzed. The REKA method (Rapid Evaluation of k and alpha) involves a single-borehole probe...

Correlation of Hydraulic Conductivity and Sonic Velocity in Water-Saturated Tuff
A laboratory study was conducted to investigate the correlation of hydraulic and sonic properties of water-saturated tuff. The hydraulic test used a new rock block testing machine, which...

 

 

 

 

Return to search