Embankment Foundation Densification by Compaction Grouting
Compaction grouting is an attractive alternate for in-place densification of liquefiable soils below existing structures. Compaction grouting application concepts and procedures are presented...
Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...
Fracture Mechanics Analysis of Massive Hydraulic Fracturing Containment
The hydraulic fracturing containment problem is the subject of the present investigation. Unlike previous studies, the interface crack geometry with the correct crack tip singularity was...
Load-Carrying Capacity and Remaining Life of First-Built Composite Girder Bridge in Japan
Kanzaki Bridge, Osaka, Japan, was the first steel-concrete composite bridge built in 1953 to carry the Osaka Prefectural Road over Kanzaki River. The bridge was removed in 1978 after 25...
Dynamic-Fatigue Response of Continuous Composite Bridges
The dynamic response of continuous composite bridges and the influence of fatigue loading at resonance frequency on the structural response are investigated. It is shown that cracking...
The Eurocodes and Shrinkage in Composite Beams
The two parts of this paper relate to different aspects of design procedures for composite structures of steel and concrete. First, recent developments in the coordination of the eight...
Experimental Investigation of Composite Rigid Frames
According to the series of tests conducted by the authors on composite rigid frame models, the compressive principal stress in the steel web plate at the corner panel was considerably...
Mixed Systems: Past Practices, Recent Experience, and Future Direction
A comparison is made between composite column capacities derived from the authors procedure utilizing the ACI (America Concrete Institute) code requirements, and previously published semi-empirical...
Shear Strengths of Concrete-Filled Steel Box Elements
This study evaluated the ultimate strengths as well as the effect of the ultimate composite actions of concrete-filled steel composites under combined bending, shear, and axial forces....
Seminar Summary and Research Needs
All the papers presented in the technical sessions of the seminar are summarized and, in some cases, commented upon. The needed research in composite and mixed construction is described....
Reshaping the Future of Plastic Buildings
Plastic structures have been around for 40 years, but have for the most part been showcases with little use in the mainstream of the building industry. To be used effectively, plastics...
New Pavement from Old Concrete
Recycling portland cement concrete has gained momentum as an alternative to resurfacing aging highway and airfield pavements. Recycling cuts down rawmaterial requirements, reduces the...
Building on Muck
The Craney Island Disposal Area at Norfolk, Va. is a 2,500 acre depository for material dredged from ports and channels in the Hampton Roads. The U.S. Army Corps of Engineers extended...
Analysis of Drinking Water Systems: A Spatial Approach
This paper describes recent examples of spatial analyses as (1) a unifying concept for allocation of costs to various elements of water treatment and delivery; (2) a link and node (Network)...
Incorporating Graphics in Water Distribution Analysis
One area that has currently been receiving attention is the presentation of hydraulic analysis results utilizing computer graphics to display pipe network and pressure values in graphical...
Water Quality Modeling of Distribution Systems
Computer modeling of hydraulic conditions in distribution systems has been widely applied over the past decade for design and operation of systems. Conversely, little attention has been...
Adapting a Pipe Network Analysis Computer Program
The Metropolitan Water District of Southern California (Metropolitan) has developed a mathematical simulation model for a key portion of its distribution system. A representative portion...
State-of-the-Art Pipe Network Optimization
Within the next decade water distribution system optimization models should become everyday tools of practicing engineers. This paper examines existing models and discusses some of the...
Optimization of Looped Water Distribution Networks
The optimization algorithm developed by G. Quindry et al. can be used to obtain a least cost pipe network for a looped water distribution system. A solution is obtained under steady state...
Water Distribution Design with Multiple Demands
An iterative procedure for the layout and design of new looped water distribution systems is pesented. The procedure is also applicable to the expansion of existing systems. The approach...
Return to search