A Mathematical Model for Transport and Mixing of Oil Slick in Rivers
A two-layer two-dimensional mathematical model for transport and mixing of oil in rivers is presented. In this model, oil in the river is considered to consist of a surface slick moving...
Soluble Pollutant Enrichment in Snow Covers
A mathematical model is presented to simulate enrichment of soluble pollutants in snow covers. The model is based on the liquid water flow, heat transport, and pollutant transport equations....
Modeling of Surface Vortices in Unsteady Flow
Hydraulic model studies of lock filling and emptying systems include investigating vortex tendencies at the intake vincinity during filling. The flow at the intake vicinity is unsteady...
A Branched Mass Transport Model of the Sacramento-San Joaquin Delta, California
A new branched mass (salt) transport model is used to simulate salt transport in the Sacramento-San Joaquin Delta, California. The model uses a two-step procedure to determine the salt...
A Computational Analysis of Dynamic Interaction of Dam with Reservoir Water and Sediment
A two-dimensional model of porous media is employed to calculate the reduction of the onset hydrodynamic pressure with the bulk modulus of pore water in reservoir sediment. However, the...
Physical Modeling Study of the Niagara River Plume
A rotating laboratory facility is used to study the dynamics of the Niagara River discharge into Lake Ontario. The current tests are limits to buoyant discharge conditions, which occur...
A Hybrid Model for Sediment Concentration Profiles
The paper discusses the deficiency in the existing theories on suspended concentration profiles which is due to the variations of theories for modeling the velocity profiles. As can be...
Experimental and Numerical Study of Overland Flow Induced by Rainfall on the Loess Slope
Based on the repeated experiments of overlad flow on the Loess slope under the condition of constant and variable artificial rainfall intensity in laboratory, the mathematical model corresponding...
Synthetic Calibration of a Rainfall-Runoff Model
A method for synthetically calibrating storm-mode parameters for the U.S. Geological Survey's Precipitation-Runoff Modeling System is described. Synthetic calibration is accomplished...
Identification Techniques for Bank Erosion and Failure Processes
The Hydraulics Laboratory of the US Army Engineer Waterways Experiment Station (WES) has developed techniques to design small flood-control channels. A component of this research is the...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Modeling a Large, Dynamic, Urban Drainage System
Impacts of progressive urbanization on peak streamflow are often difficult to quantify due to the dynamic, but subtle changes from year-to-year. In this instance urbanization impacts are...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
Bootstrapping Nonlinear Storm Event Models
A bootstrap method for estimating the parameters of nonlinear storm event models is presented. The method pools (combines) the parameter estimates obtained from fitting computed and observed...
Innovative Spillway Design
The Lake Alan Henry Dam, near Lubbock, Texas, will consist of an earth filled embankment, a service spillway and an emergency spillway. The service spillway is designed to handle flows...
Scale Effects of Overflow-Oriented Hydraulic Parameters for a High Dam
This paper presents the findings of prototype observation and model verification on the surface velocity, the range of nappe jetting, and the diffusion regime of the discharged flow related...
Operational Model Development for Salinity Control
The 800 km2 Breton Sound estuary and watershed in Louisiana is being modeled to characterize its salinity regime in terms of hydrometeorological...
Application of the Generalized Channel Routing Model
Using the linear full dynamic finite difference model the applicability of diffusion and kinematic wave models is investigated. Two dimensionless numbers are suggested for applicable range...
The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...
Return to search