Modeling Fatigue Crack Growth Resistance, dN/da
In the fracture mechanics approach to fatigue, da/dN is correlated with the cyclic range of the stress intensity factor, ?K; the resulting relation, da/dN=f (?K), is commonly called the...
Load Combinations for Codified Design
Loading requirements used in current standards for structural design are not consistent in their conceptual basis, appearance or use. Unified limit states design procedures for structures...
Development of Bridge Design Code
Load and resistance parameters for bridges involve uncertainties due to natural randomness, imperfect models or human errors. Because of these uncertainties, absolute reliability is not...
Probabilistic Load Combinations in Nuclear Structures
A variety of loads affect a nuclear power facility during its lifetime. The magnitudes or intensities of these loads are uncertain, and for some of them, their time of occurrence is also...
A Reassessment of Codified Limit States Design
This paper examines the nature of design codes and their relation to engineering practice. It suggests that codes impose unjustifiable and, in the long term, destructive constraints on...
Fracture Mechanics Fatigue Reliability Assessment Employing the Most Probable Point Locus Method
The statistical distribution of cycle life, N, could be easily constructed if N were an explicit function of the design factors. A simple strategy for constructing the distribution of...
Probabilistic Design of Flexible Pavements
Numerous random phenomena enter into the process of deterioration of pavements under the effect of traffic. It is felt that improvement in current design methods could be obtained by adopting...
Multicriterion Reliability-Based Optimization of Structural Systems
The optimization of nondeterministic structural systems under random loads is currently performed by single-criterion reliability-based optimization methods. However, in structural design...
Probabilistic Design of Offshore Structural Systems
Probabilistic design of structural systems is considered in this paper. The reliability is estimated using first-order reliability methods (FORM). The design problem is formulated as the...
Analysis of Bridge Truck Loads
The development of the reliability-based load and resistance factor design (LRFD) methodology requires uncertainties in loads and resistance be quantified. In the load capacity evaluation...
Research Needs for Rational LRFD Criteria
There are at least a dozen factors causing or influencing impact. Current design specifications consider only a few of these. Location of truck wheel loads within the traffic lanes on...
Bridge Reliability?Evaluation vs. Design
Probabilistic methods of structural safety are being widely accepted as a basis for rationally considering uncertainties and developing reliability based design specifications for various...
MA to ARMA Two-Stage Monte Carlo Simulation
A prior autoregressive (AR) model can be the basis to obtain a quite eficient and reliable subsequent autoregressive moving average (ARMA) approximation. The design of the AR system which...
Applications of ARMA Models for Seismic Damage Prediction
As an alternative to current design practice which is based on peak measured ground motions and scaled records from different events, individual earthquake records are treated as samples...
Rehabilitation of Highway Bridges: Design and Operational Considerations
The design of a rehabilitation of a bridge which must maintain some lanes of traffic requires special consideration of construction procedures and traffic control, which are discussed...
The Role of Decision Rules on Structural Safety Evaluation Systems
Three steps are involved during an assessment procedure. The first step is to make a diagnosis for possible causes of the damage, the second is to perform a qualitative evaluation including...
Reliability Based Optimal Structural and Mechanical Design
A reliability based optimal design strategy has been developed. Nonlinear limit state functions and nonnormal random variables can be accommodated. For structural systems analysis, a failure...
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Reliability Analysis of Single-Headed Anchor Bolts
Several design equations for predicting the capacity of single-headed anchor bolts embedded in plain concrete have been recommended in the United States. The capacities predicted by these...
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Return to search