Dispute Resolution ? A New Approach for Public Acceptance of the High-Level Radioactive Waste Mamagement Regulatory System
This paper examines the feasibility of utilizing Dispute Resolution to significantly reduce the numbers of technical disputes subject to litigation in civil courts or before the NRC to...
The Public Consultation Program on Nuclear Fuel Waste Management in Canada
Atomic Energy of Canada Limited has conducted a public consultation program (PCP) with public interest groups broadly representative of Canadian society to identify the issues of public...
Beyond NEPA: A Look at Socioeconomic Impact Assessments Required Under the Nuclear Waste Policy Act, as Amended
The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) has been charged by Congress, through the Nuclear Waste Policy Act, as amended (the Act),...
Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...
Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...
Properties of the West Valley Waste Form
The centroid composition of the West Valley Demonstration Project waste form has been selected on the basis of criteria mandating high chemical durability and good processibility. A review...
Computed Distributions of Residual Shaft Drilling and Drift Construction Water in the Exploratory Facilities at Yucca Mountain, Nevada
The Yucca Mountain Project is studying the feasibility of constructing a high-level nuclear waste repository at Yucca Mountain in southwest Nevada. One activity of site characterization...
Research for Final Disposal of Unreprocessed Spent Nuclear Fuel in Sweden
The second Swedish programme on research, development and demonstration in the nuclear radioactive waste management area was submitted by SKB to the Swedish National Board for Spent Nuclear...
Assuring Data Quality for Use in Waste Management System Trade-Off Studies
This paper details the systems engineering approach developed to ensure the integrity of a large data library throughout its development and application. The paper assesses the benefits...
Preliminary Conceptual Design Description of the Proposed DOE Store-Only Monitored Retrievable Storage (MRS) Facility
The Nuclear Waste Policy Act (NWPA) of 1982 required DOE to examine the options for the provision of long term spent fuel storage in monitored retrievable storage (MRS) facilities. Specifically,...
Ventilation and Construction Considerations for a High Level Nuclear Waste Repository
The storage of high level nuclear waste in an underground repository presents engineering problems in ventilation, construction methods and plan, and in proposed retrievability. Temperatures...
Requirements and Concept for an On-Orbit Construction Facility for Phase 1 Space Station Freedom
Future NASA plans for exploring the solar system and programs such as the Large Deployable Reflector and Pathfinder require in-space construction for their success. The technologies required...
Space Station Freedom Attached Payloads and Commercialization
The Space Station Freedom (SSF) accommodates a class of payloads called external attached payloads. These payloads are attached to the main truss of Space Station Freedom through the use...
Technology Needs Development and Orbital Support Requirements for Manned Lunar and Mars Missions
This paper will present an overview of the critical technology needs and the Space Station Freedom (SSF) focused support requirements for the Office of Exploration's (OEXP)...
MALEO: Modular Assembly in Low Earth Orbit: An Alternate Strategy for Lunar Base Deployment
Modular Assembly in Low Earth Orbit (MALEO) is a new strategy for building an initial operational capability lunar habitation base. In this strategy, the lunar base components are brought...
Application of Automation and Robotics to Lunar Surface Human Exploration Operations
Major results of a study (RLSO, 89) applying automation and robotics to lunar surface base buildup and operations concepts are reported. The study developed a reference base scenario with...
Manifesting for a Lunar Robotic, Oxygen-Producing Base
Using robotic systems and human supervisory control, a lunar base reasonably be established to achieve full production within five years. Intermittent human presence works in coordination...
A Robotics Testbed for In-Space Assembly Tasks
The operations testbed of the Center for Space Construction at the University of Colorado is described. This testbed serves as a centralized testing environment for interdisciplinary research...
Prefabrication of Ceramic Segments by Compaction and Microwave Fusion Technology
Material source and environmental impacts are two major concerns in the application of conventional concrete technology in lunar base construction. In this study, the simulated lunar soil...
Wave Propagation in Hyper-Structures
The concept of hyperelement was introduced by E. Kausel and J.M. Roesset, 1977 in connection with the derivation of the dynamic stiffness matrix for layered continuum problems involving...
Return to search