Simplified Design and Construction Control for Roller Compacted Concrete
This paper presents a simplified approach to the design and construction quality control of roller compacted concrete (RCC) based on research of previous projects, discussions with experienced...
Geotechnical Innovations: Why Seldom Used in Highways?
Ground improvement methods introduced within the past decade to American geotechnical engineers offer cost savings, ease of construction and reduced construction time. Amont these innovations...
Slurry Trenches for Containing Hazardous Wastes
Slurry trench technology has not advanced much during the past 10 years due to a lack in research and development, the excerbated litigious climate in the environmental protection field,...
Flowable Fly Ash: A New Cement Stabilized Backfill
Cement stabilized fly ash placed at a plastic fluid consistency is a new structural backfill material that flows into place, either above or below water, without using sophisticated construction...
Fluid/Structure Interaction During Seismic Excitation
Hydrodynamic loading and other fluid/structure interaction effects need to be considered in the design of structures which contain, surround, or are submerged in fluids when subject to...
Just a Few More Tests and We'll Be Sure
This short paper presents a practical approach to data analysis, with the intent of suggesting that simple statistical methods - when tailored to geotechnical problems - do in fact provide...
Principles of Probabilistic Characterizations of Soil Properties
Sources of uncertainties affecting characterization of soil properties in a homogeneous soil layer include inherent spatial variability, systematic test bias, random test errors, calibration...
Coefficient of Variation of In Situ Tests in Sand
For a research project on the behavior of piles in sand for the United States Geological Survey and the Federal Highway Administration, ten sites were selected where detailed load tests...
Fire Combustion Toxicity Tests�Good Idea or Not?
The smoke from burning synthetic materials in buildings is highly toxic and is a key cause of deaths in building fires. If fire codes regulate on the basis of the toxicity of smoke of...
Engineering Liabilities for Design of a Bridge That Failed During the San Fernando Earthquake
On February 9, 1971, the San Fernando Valley in Southern California experienced a major earthquake. Among the victims were two men who were killed when a bridge connector ramp of a newly...
Seismic Considerations for the Century Freeway
The Century freeway (Interstate 105), will be an 18 mile (29 km) long, six-lane facility with 2 central transit/HOV lanes, located in Los Angeles, California. The freeway alignment crosses...
Base Isolation Concepts for Seismic Bridge Retrofit
Failures in past earthquakes have indicated three major problem areas with existing bridges. The first is the vulnerability of existing rocker and roller type bearings and this is coupled...
Seismic Risk and Decision Analysis of Lifeline Systems
This paper provides general guidelines for performing lifeline seismic risk and decision analyses. Relevant input models are introduced as they support the performance of component and...
CSMIP Strong-Motion Instrumentation and Records from Transportation Structures?Bridges
Seven transportation structures have been instrumented by the California Strong Motion Instrumentation Program (CSMIP), including four bridges. Records (in excess of 0. 25 g maximum acceleration)...
Seismic Design of Airport Control Towers
The paper describes state-of-the-art design in seismically active areas. It includes a review of current code design parameters and specific tower design criteria. Tower design examples...
Port of Seattle Seismic Waterfront Design
This paper describes the soil seismic design process, using the design developed for a concrete apron project at Terminal 20 as an illustration. Damage by the 1965 earthquake is described....
Seismic Response of Port and Harbor Facilities
A research program compiled information regarding the behavior of port and harbor facilities during past earthquakes. The potential for significant damage to port and harbor facilities...
Intermountain Power Project Seismic Design
Coal-fueled generation units of the Intermountain Power Project are constructed in a seismically active area of Utah (UBC Zone 3). The seismic design criteria were published during the...
An Overview of Earthquake Design Requirements at Pacific Bell
Seismic design considerations for the telephone system including outside plant and telephone equipment are discussed with emphasis placed on the requirements incorporated in the design...
Seismic Risk and Reliability of Telecommunications Systems
A general method for seismic risk analysis of telecommunications sytems evaluates by statistical means the earthquake environment and the earthquake vulnerability and effects on the system...
Return to search