Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Study on Hydrologic Response Via Channel Network Geomorphology
A drainage basin consists of slopes and channels. Slopes are the main fields at which rainfall input is converted into discharge. Stream-channels are the main fields at which the discharge...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
The Sediment Weighted Histogram Generator and Estimation of Sediment Transport Trends
Long term sediment transport trends may be evaluated using a sediment histogram generator program that was written for microcomputers. Flows can be extracted directly from a compact disc...
Operational Model Development for Salinity Control
The 800 km2 Breton Sound estuary and watershed in Louisiana is being modeled to characterize its salinity regime in terms of hydrometeorological...
An Investigation of Continuity Equation and Flood Routing
In this paper, a flood routing scheme, which gives consideration to the advantages of both the Muskingum method and the unit hydrograph method, is derived by using the continuity equation...
Kinematic Wave Based Hydrologic Models with Different Solution Methods
The hydrologic simulation models RUNOFF and HEC-1 are applied to a 3212-ha watershed in New Jersey, and performances of the two models in predicting historical stromwater hydrographs from...
Integration of GIS, Remote Sensing, and Digital Elevation Data for a Hydrologic Model
The Agricultural Nonpoint Source Pollution Model (AGNPS), which was developed by Agricultural Research Service, was used as a test model for assessing nonpoint source pollution. The model...
Paleoflood Hydrology and Design Decision for High-Risk Projects
Paleoflood hydrology is not merely one of several alternative methods for risk-based design. Rather, certain kinds of accurate data on the largest paleofloods of recent millennia provide...
A Regionalized Rainfall-Runoff Stochastic Model
The single area unit hydrograph model is used to develop a distribution model which accommodates the uncertainty in rainfall over the catchment. By categorizing the available rainfall...
Regionalization of Precipitation Droughts in the Scioto River Basin
By the use of monthly precipitation, droughts are defined based on different truncation levels, namely, 70%, 80%, 90%, and 95%, where a 70% truncation level means that 70% of the recorded...
Extraordinary Floods in Arid South Africa
South Africa, a country where 65% of the area receives less than 500 mm of rain annually, has experienced many major floods during the last century. The importance, aim and scope of the...
Status and New Capabilities of Computer Program HEC-6: Scour and Deposition in Rivers and Reservoirs
Last year the Hydrologic Engineering Center (HEC) and the Waterways Experiment Center (WES) incorporated the results from more than ten years of research and development into a new version...
Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
The Hydraulic and Hydrological Interactions Between Urban Sewer Systems and Receiving Waters at High Discharges
In the transition region from sewer to river, the penetration of river flood water into the sewer network or the hydraulic overload of small rivers due to sewer system discharges, may...
Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...
Data Acquisition for Determining the Physical Impacts of Navigation
Research is being conducted to determine the physical effects of navigation on the Upper Mississippi River System (UMRS). Extensive field data on various aspects of physical effects of...
Pump Selection Program and a Better User Interface
Numerous highly innovative computer solutions to engineering problems are of little use to the practicing engineer because these programs are not supported by adequate user interface....
Return to search