The CBR Test Applied to Processed and Compacted Snow
The processes used during the past two decades to improve the snow bear a modest resemblance to conventional flexible pavement construction, thus the field CBR (California Bearing Ratio)...
Soil Strength Recovery Using a Clegg Impact Device
The research described in this paper uses the Clegg Impact Device to determine the relative strength of a soil, and describes how this information can be used to develop the strength recovery...
Installation of Thermistor Strings in Test Borings: A Comparison of Methods and Results
Several test borings were instrumented with two thermistor strings, one inside and one outside an air-filled PVC casing to compare readings of both thermistor strings and the stability...
Testing of Admixtures for Seabed Strengthening
Samples from several offshore soil borings in an area of the Beaufort Sea were subjected to laboratory testing to determine the applicability of this method. The soils were mixed with...
Reinforced Roads Bridging Voids
A mathematical model was developed to design a pavement section reinforced with a geotextile or related product to span a void. A full scale field test was conducted to verify the model....
Ice Cover Research?Present State and Future Needs
Presentation reviews, at first, a number of problem areas in ice engineering, such as the determination of vertical and horizontal forces floating ice covers exert on fixed structures,...
Geomembrane Liner Performance in the Arctic
A geomembrane liner must be selected not only on the basis of its chemical compatibility with the substance to be contained, but also on the basis of its physical performance characteristics...
Wave Forces on an Arctic Monotower Platform
At offshore lease sites located along the western coast of Alaska, longer periods of open water can be expected. As a result, wave induced hydrodynamic loading will become a more significant...
Bearing Capacity Calculations for Piles in Permafrost
Small-scale model piles frozen in various soils were tested at constant rates of displacement and constant load. The derived values were used to calculate the maximum allowable stress...
Finite Element Analysis of Concrete Armor Units Subject to Wave Impact
Concrete armor units are commonly employed for the protection of shorelines and rubble structures. Their design is primarily based on hydrodynamic stability. However, their structural...
Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...
Broke2: A Program for Broken Wire Analysis
A computer program to study the dynamic behavior of an electric transmission line system when wires suddenly break has been developed by the authors. All three of the line elements: the...
Dynamics of Machine Foundation
The art of designing machine foundations, supporting vibratory load has changed from the approximate rule-of-thumb to the scientifically sound engineering procedure. However, the vast...
Dynamic Soil-Structure Interaction by the Boundary Element Method: A Comparison Study
A comparison study of three Boundary Element Method approaches is attempted on the basis of a typical three-dimensional, dynamic soil-structure interaction problem. The vertical transient...
Solving Finite Element Structural Dynamic Problems on Small Computers Using Semi-Explicit Methods
Numerical techniques based on the partial decomposition of a coefficient matrix, are developed for structural dynamic problems. Improved iterative techniques are discussed which could...
The Lanczos Method in Structural Dynamics
The solution of the equations of motion often results in the solution of an eigenvalue problem in which the system matrices are large. Traditionally, the solution of this problem has employed...
Finite Element Discretization for Mixed-Mode Fracture Problems
The finite element discretization of mixed-mode problems in fracture mechanics is investigated. The characteristics of the mesh near the crack affect the accuracy of the finite element...
Response of Eccentrically Braced Tall Buildings
The inelastic dynamic response aspects of tall steel buildings with eccentric K-bracing and eccentric X-bracing systems are examined, when subjected to factored El-Centro and computer...
Analysis of R/C Slab Under Turbine Missile Impact
Turbine missile impact on reinforced concrete barrier in nuclear reactor power plants is simulated using the finite element method. One of four full scale turbine missile impact tests...
Measuring Dynamic Occupant Loads by Microcomputer
Present building codes regard live loads caused by human movement as deterministic; values are based upon experience and tests run in 1912, 1922, and 1932. An experimental project to statistically...
Return to search