Effects of Simulated Ice on the Performance of Price Type-AA Current Meter Rotors
Slush ice readily adheres to the standard metal rotor of the winter Price type-AA current meter and affects the ability of the meter to measure the flow velocity accurately. Tests conducted...
Experimental Study on Unsteady Flow in Open Channels with Flood Plains
Hydraulic characteristics of unsteady flows were investigated experimentally in open channels with flood plains using a computer-controlled water supply system. Some noticeable features...
A Computer-Controlled, Precision Pressure Standard
The operating principles as well as the technical aspects of the implementation of a precision pressure standard are presented here. The instrument can have dual use: either as a pressure...
Multi-Reservoir Systems Optimization by the Aggregation/Decomposition Methodology
Studies on long term optimization of multi-reservoir systems are enhanced by the availability of closed-loop policies as available in Stochastic Dynamic Programming (SDP). SDP offers a...
Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...
Hydro Plant Research Data Acquisition System
The Colton Hydroelectric Development, located on the Raquette River in the northwestern part of New York State, is the site of a two year research project to test the use of heated trashracks...
Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...
Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....
Laplace Valve Stroking for Complex Piping Systems
LaPlace valve stroking to control water hammer is applied in complex piping systems with friction and without friction. Two types of system are analyzed. The law of operation of the valves...
Flow and Sediment Transport at River Diversions
Flow pattern and sediment transport at diversions are studied. Submerged vanes are shown to be an effective measure for reducing sediment entrainment. Effectiveness of the vanes is evaluated...
Development of Long-Term Three-Dimensional Hydrodynamics in Long Island Sound for Use in Water Quality Modeling
The Blumberg-Mellor (1987) three-dimensional hydrodynamic model has been adapted by the National Oceanic and Atmospheric Administration's National Ocean Service (NOS) to provide hydrodynamic...
Summary of Highway Product Evaluation Practices and HITEC Needs Survey
This report (CERF No. 94-5012) contains the results from a survey conducted by the Civil Engineering Research Foundation (CERF), the research affiliate of the American Society of Civil...
Analysis and Computation
This proceedings,
Computer-Integrated Construction
Computers have been used quite successfully as replacements for manual drafting, but to stop there seriously underuses the potential of computer aided design. By using the computer's...
Minimizing the Probable Maximum Flood
A newly-developed probable maximum precipitation (PMP) estimate for Wisconsin and Michigan reduced precipitation depths by 20%. Should a given area's probable maximum flood...
Chicago Automates Expressway Lanes
Chicago motorists will soon reclaim another rebuilt expressway in October with substantial completion of a $450 million, 7.5 mi portion of I90/94, the John F. Kennedy Expressway. The two...
GPS Goes Real Time
This paper discusses the feasibility of Trimble Navigation's Site Surveyor System using Real-Time Kinematic (RTK) technology for conducting cadastral surveys. The use of RTK...
Glossary of the mapping sciences
The
Existing Sewer Evaluation and Rehabilitation
This manual,
Information, Global-Style
The quality, timeliness and accuracy of information can give an international architectural, engineering and consulting firm a distinct competitive advantage, and the wrong system can...
Return to search