Urban Development on Alluvial Fans
An increasing number of developments has been planned in areas subject to flood hazards. To protect developments from flood damage and to prevent accumulated negative effects on floodplains,...
Gradual Development of Bores in Canal Systems
Modern computer programs for modeling unsteady flow in open channels are typically constructed using a momentum conserving form of the Saint Venant equations. This allows computation of...
Modifications to Coal Pier 6 Made Necessary by a Deeper Channel
In 1987 it became apparent to the Norfolk Southern Corporation that the U.S. Army Corps of Engineers proposed dredging of the Norfolk, Virginia Harbor would become a reality. Coal Pier...
Environmental Monitoring and Operator Guidance System (EMOGS) for Shallow Water Ports
Port facilities have increasingly been required to accommodate longer and deeper draft ships. Existing approaches to many ports consist of long shallow channels which can make transits...
Barbers Point Harbor: A Unique Solution for Port Upgrade
A remote-controlled model of a C9 containership was used to evaluate the navigability of existing harbor and entrance channel conditions in a three-dimensional physical model of Barbers...
Ship Simulation of the Houston Ship Channel, Houston, Texas
The Houston Ship Channel (HSC) consists of approximately 65 miles of improved deep-draft channels. The present channel is 400 ft wide and 40 ft deep at mean low tide for most of the channel...
Draft Chapter 2?Planning and Design Guidelines for Small Craft Harbors?Entrance Design and Breakwaters
The paper will present a very preliminary draft of the second chapter of an ASCE manual that is currently being developed. The new manual is entitled Planning and Design Guidelines for...
Three Dimensional Modeling of Watershed Hydrology
A three dimensional finite element numerical model is developed for the first order watershed hydrology using 8-noded isoparametric brick elements. The 3-D subsurface flow in a hillslope...
Trickle Channel Rehabilitation
Perhaps the primary factor driving the need for trickle channels is urban development. Rural streams in the region display a hydraulic stability and vegetative cover that is resilient...
The Challenge of Kissimmee River Restoration
Between 1962 and 1971, the Kissimmee River in central Florida was channelized by the Corps of Engineers as part of a flood control project. Channelization has resulted in degradation of...
The OCEA Awards of Merit
Submerged rock weirs help tame the Mississippi River, high head pump storage provides power to a community safely and inexpensively, and the world's largest cantilevered hangar...
Parallel Processing in Water Management
The introduction of parallel processing as an alternative to super-computing provides opportunities for rapid numerical integration of equations describing open-channel hydrodynamics....
Field Measurement of Surface Flows in Shallow Estuaries
This paper summarizes our first-year results of an ongoing multi-discipline project, which examines the physical processes of wetlands erosion and loss in coastal Louisiana. Our task is...
An Expert System for the Planning and Design of Flood Control Channels
The planning and design of flood control channels often calls for the evaluation of a unique set of physical conditions which do not lend themselves to standard designs. Consequently,...
A Comparison of Accuracies of Steady Water Surface Profiles
The author compares the effect of varying boundary conditions and cross sectional spacing on one dimensional steady water surface profiles. Six streams are modeled using both the 10 and...
A Control Method for On-Demand Operation of Open-Channel Flow
This paper proposes a control system for the automatic operation of an open channel having upstream and downstream gates. The main issue is the use of a discrete-time algorithm which computes,...
Numerical Modeling of Pollutant Transport in Estuaries
A robust numerical solution to the pollutant transport phenomenon in an estuary is presented. The fractional step algorithm is employed to split the physical process into convection step...
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Instability in Granular Chute Flows
Numerical simulations showed that granular flows in a vertical chute can flow as a steady, uniform stream or as an intermittent slug flow. In numerical experiments slugs or grouping of...
Return to search