Fatigue Strength of Welded Wire Fabric
Long life fatigue tests were made on 12 concrete slabs reinforced with large diameter, Grade 75, deformed welded wire fabric. The specimens simulated, to full scale, conditions in a bare...
Thin Precast Fiber Reinforced Cement Panels
This paper provides an overview of some current applications, manufacturing methods, and physical properties of thin fiber reinforced cement board products currently produced. Many of...
Polymer Concrete for Structural Applications
Polymer concrete (PC) has been used extensively in the United States primarily as a repair material for portland cement concrete. The excellent flexural and compressive strength durability...
Cyclic Energy Absorption by Reinforced Concrete
Results are presented on the basis of experiments conducted on conventional and steel fibrous reinforced concrete beams. The effects of the amount and nature of steel reinforcement and...
Full Scale Tests of Cladding Components
A full scale, six story, steel frame at the Building Research Institute, Tsukuba, Japan was constructed for a series of projects in the U. S. -Japan Cooperative Research Program. This...
Removal of Radon and Uranium from a water supply
The removal of Radon and Radium from drinking water with the help of granulated activated carbon (GAC) adsorption was investigated. A packed bed column was used for the purpose. It has...
Removal of EDB from Groundwater by Granular Activated Carbon Filtration
Application of ethylene dibromide (EDB) pesticide to crops may result in contamination of groundwater. Various water treatment alternatives are: granulated activated carbon adsorption,...
What About the Point-of-Use?
Point-of-use (POU) granular activated carbon (GAC) treatment devices are being installed more frequently on community water sytems and on private wells. This article describes carbon filter...
Structural Applications of SIFCON
SIFCON (Slurry Infiltrated Fiber CONcrete) is a relatively new composite material utilizing steel fibers in a cement-based matrix. It differs from conventional steel-fiber-reinforced concrete...
Delamination and Remedial Repair of GFRC Cladding Panels
The construction of a six story, steel framed office structure included an exterior cladding of prefabricated glass fiber reinforced concrete (GFRC) panels. The typical full-size panel...
Application and Performance of Structural Materials and Exterior Facades
The papers in this book present some of the current thinking associated with today's construction materials as well as the results of research which is directed toward the...
Carbon Columns: Success at Last
The first large scale application of carbon columns for municipal wastewater treatment has been operating for two years. The columns were designed as part of a program to upgrade an out...
Response of Concrete Shell Panels to Simulated Impact
Concrete gravity structures have been constructed in Arctic regions for oil and gas exploration/production. In addition to extreme winds and waves, sheet ice, annual ridges, rubble fields,...
Composite Steel Deck Bridge: An Experimental Study
Composite steel decks with steel fiber reinforced concrete (SFRC) were developed, aiming to improve the durability of the deck pavement and to increase the rigidity of the deck plate in...
Water Quality Modeling of Key Largo Coral Reef
A numerical model called CORALSIM has been developed for the Key Largo Coral Reef National Marine Sanctuary in the Florida Keys. The model was developed as a management tool to study the...
Characterization of Indoor Carbon Monoxide Levels Produced by the Automobile
Integrated air samples were obtained at seven small and six large service stations and two dealerships. These establishments were sampled during cold and warm weather operations for eight...
Building Assessment Techniques for Indoor Air Quality Evaluations
Techniques for indoor air quality evaluations are presented and discussed. The techniques presented first focus on procedures to determine effective ventilation rates and pathways of air...
The Use of Activated Carbon as a Polishing Step for Treatment of Industrial Plating Wastewaters
An activated carbon adsorption process was utilized as a polishing step following the precipitation (hydroxide or sulfide) process. Zinc and cadmium were the metals studied. Since plating...
Predicting Carbon Adsorption of Organics from Humid Air
Increased levels of humidity resulted in reduced adsorption capacity for trichloroethylene (TCE) at low influent concentrations on a microporous activated carbon. Water vapor also reduced...
Design of a GAC Water Treatment System for Radon
The author describes the design of a granular activated carbon (GAC) treatment system for the removal of radon from a public water supply....
Return to search