Evaluating Sensitivity of Hydraulic Control Optimization Models
Sensitivity of hydraulic control optimization models to variation in gradient constraints is examined. Monte Carlo simulation is used in conjunction with repeated optimization runs to...
Probabilistic Characterization of Droughts
The Palmer Drought Severity Index (PDSI) uses a set of meteorologic and hydrologic variables to create a numerical value for drought severity. The index values are grouped into drought...
Application of the PCRSS Reservoir Simulation Model to the Salt River Project
PCRSS is a general purpose reservoir system model construction kit. It allows the user to specify the system configuration and parameters through the use of a windows based graphic user...
A Decision Support System for Multi-Purpose Reservoir Operations
A generalized decision support system (DSS) is presented for developing optimal operation policies for multi-purpose reservoirs. The model is designed for single reservoirs, although is...
Design Considerations for Night Storage in Irrigation Systems
Due to the farmer social and economical changes, irrigation during night became rare. Most of the night discharges flow to drains. A design procedure has been developed for storage in...
Modeling Flow in Variably-Saturated Porous Media
An expression for effective hydraulic conductivity to solve groundwater flow problems is developed. Also, a refined Monte Carlo (MC) simulation procedure is proposed. The developed methodologies...
Hydrodiplomacy on Forester Creek
The goal of this paper is to share information regarding political battles confronting the engineer with regards to drainage issues and concerns. Very often drainage boundaries do not...
Multiobjective Models for Determining Freshwater Inflows to Bays and Estuaries
This paper presents four multiobjective models for the estuary management problem, including goal programming, the epsilon constraint method, the surrogate worth tradeoff method and the...
Low-Flow Frequency Analysis with Censored Data
Log-linear regression models are often fit to low-flow quantile estimates from gauged sites to obtain a relationship for estimating low-flow quantiles at ungauged sites. In some regions...
WATSUP: A Simulation Model for Water Supply Cost and Reliability
WATSUP (Water Supply) is a computer model developed to provide a prototype modeling tool for planners to estimate the costs and reliability of urban water supply systems on a regional...
Opportunities, Constraints and Change in Reservoir Management
Changing hydrologic, economic, social and environmental conditions have focused attention on the opportunities for changing reservoir management. Such change can occur in three areas....
Flood Control vs. Flood Management
For the last 130 years, flood policy in the U.S. has been dominated by the belief that floods can be controlled by structural methods, such as levees, dikes and embankments. These efforts...
Graphical-Based Productivity Transient Investigation Using DISCO
Construction operations involve complex resource interactions and are typically performed in the field with exogenous factors such as inclement weather conditions and equipment breakdowns....
A PC-Based Stochastic Project Scheduling and Costing Module
Project delays and cost overruns are very common in construction industry. This may be back-traced significantly to non or ill treatment of uncertainties that overwhelm construction projects....
An Integrated Approach To Repetitive Construction Planning
Repetitive construction projects are unsuited for the use of the Critical Path Method (CPM) for their scheduling. Statistical simulation techniques offer a scheduling alternative, but...
Managing Uncertainty in Project Planning and Execution: Introduction and Overview
This paper provides an introduction and overview of topics that are relevant to project design and management under conditions of uncertainty, with an emphasis on civil engineering projects....
Range Estimating -- User-Friendly Risk Analysis
This paper introduces the reader to Range Estimating - a user-friendly decision technology for project cost risk analysis. Although developed with the non-statistician in mind, Range Estimating...
Improved Computer Simulation of 3D Wind Flow Around a Building
A two-layer method combining the k-? model with the one-equation model near the wall has been tested in computing the wind conditions around a cubic building. In contrast with the simple...
Different Methods to Compute Pollutant Dispersion Around Buildings
Different methods to approximate the advection terms currently in use are reviewed. Holly-Preismann (HP) cubic interpolation using method of characteristics, Chapeau function (CF) method...
Random Vortex Models in Wind Engineering
Random vortex methods are Lagrangian particle-based numerical simulation schemes especially appropriate for Wind Engineering simulations. Vortex methods do not suffer from numerical diffusion...
Return to search