ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Measured Performance and Numerical Analysis of Buried Pipe
This study shows that the behavior of a soil pipe system can be assessed by a nonlinear elasto-plastic finite element analysis. The results of numerical calculations are compared to the...

Design of Drainage Pipes Below Landfills
Drainage pipes are an essential component of landfills. Even though their embedment conditions differ substantially from those of pipes for municipal utilities near the ground surface,...

FE Elastic Analysis of Measured Earth Pressure on Buried Rigid Pipes in Centrifuged Models
FE elastic analyses of earth pressure on buried rigid pipes yielded results that agreed well with the earth pressure measured in 42 centrifuged models, confirming both the reliability...

A Look Back in Time to Verify Life Cycle Cost Analyses
The proper engineering design of any hydraulic structure requires consideration of different but interrelated fields of: 1) Planning, 2) Hydrology, 3) Hydraulics, 4) Structural, 5) Installation,...

Incorporating Seismotectonic Data into Seismic Hazard Analyses
A wide range of seismotectonic data are now being incorporated into probabilistic seismic hazard analyses, supplementing the inadequately short historical seismicity record. This paper...

Optimal Route Selection for High Level Nuclear Waste Transport Based Upon Radiological Risk
The purpose of this paper is to demonstrate route optimization based directly upon the minimization of radiological risk as computed from local conditions. An operational impact analysis...

PAGIS & PACOMA: Performance Evaluations of Deep Geological Disposal. Results and Conclusions
Two coordinated research projects were undertaken by the Commission of the European Communities to study the safety performances of geological radwaste disposal systems in the post-operational...

Evaluation of Near-Field Thermal Environmental Conditions for a Spent Fuel Repository in Tuff
A repository heat transfer analysis is being performed by the Pacific Northwest Laboratory (PNL)^a for the U.S. Department of Energy's...

Technical Considerations and Approcah for Evaluating Substantially Complete Containment of High-Level Nuclear Waste
The current Federal Regulations, Title 10 Part 60.113(a)(1)(i)(A) require that, for at least 300 years, nuclear waste containment within a waste package shall be substantially complete....

Permeability and Dispersivity of Variable-Aperture Fracture Systems
A number of recent experiments have pointed out the need of including the effects of aperture variation within each fracture in predicting flow and transport properties of fractured media....

Thermal Stability of Zeolitic Tuff from Yucca Mountain, Nevada
Thermal models of the potential repository at Yucca Mountain, Nevada, suggest that rocks near the potential host rock will experience elevated temperatures for at least 1000 yr. In order...

Optimization Method for Dimensioning a Geological HLW Waste Repository
This method was developed by the CEA to optimize the dimensions of a geological repository by taking account of technical and economic parameters. It involves optimizing radioactive waste...

Evaluation of the Canadian HLW Disposal Program?Performance Assessment Aspects
The inception and development of the Canadian HLW disposal program are described, showing its basis in the multi-barrier system concept and noting the mechanisms in place for its evaluation...

A Demonstration of the Systems Integration Modeling System (SIMS) as a Decision-Support Tool
In April 1989, the Office of Civilian Radioactive Waste Management (OCRWM) Integration Branch completed major demonstration of the Systems Integration Modeling System (SIMS). That system...

Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...

Important Factors in Developing a Nuclear Waste Management System
The nuclear waste management system provides unique challenges for a large and diverse segment of our society. For the politician there is the blending of national policy and the interests...

Postclosure Safety Assessment of Radioactive Waste Disposal Systems: Current State of Understanding and International Consensus
Approximately ten years have passed since the first comprehensive safety assessments of radioactive waste disposal systems appeared. Through intensive efforts in practically all countries...

Data Quality Assurance Controls Through the WIPP in Situ Data Acquisition, Analysis, and Management System
Assurance of data quality for the in situ tests fielded at the Waste Isolation Pilot Plant is of critical importance. These tests supply the information for development and verification...

Systems Integration Operations/Logistics Model (SOLMOD)
SOLMOD is a discrete event simulation model written in FORTRAN 77 and operates in a VAX or PC environment. The model emulates the movement and interaction of equipment and radioactive...

A Systems Engineering Cost Analysis Capability for Use in Assessing Nuclear Waste Management System Cost Performance
The System Engineering Cost Analysis (SECA) capability has been developed by the System Integration Branch of the U.S. Department of Energy's Office of Civilian Radioactive...

 

 

 

 

Return to search